Results 1 to 7 of 7

Thread: Need a part number (2006 500GT)

  1. #1
    apriliaforum Member dleasman's Avatar
    Join Date
    Mar 2011
    Location
    Mankato, MN USA
    Posts
    99

    Need a part number (2006 500GT)

    I need a part number... For the plastic cable stop for the hard pannier door (stops it from opening too far)
    It's a flexible plastic stem, maybe 6" long, with a loop on each end that hooks to the inside of the lid, and body of the pannier.

    Any chance ANYONE has a part list that would show this part?

  2. #2
    apriliaforum expert
    Join Date
    Apr 2011
    Location
    Clearwater, Fl
    Posts
    8,221
    You may have to call AF1 or contact Givi directly for those. I had on snap on one side of my top case and I have not been able to locate any parts listing showing it for sale so I plan on making the call too. The are a fragile consumable so I would think it reasonable that they be sold in common sizes based on length but...

  3. #3
    apriliaforum Member dleasman's Avatar
    Join Date
    Mar 2011
    Location
    Mankato, MN USA
    Posts
    99
    Thanks for the tips.
    I was able to get a full parts diagram off the AF1 site, and save it. I had not found this document previously, but is now part of my Beo500GT docs collection.

    Unfortunately, there is minimal information in the parts list for the side cases.

    Giving was a great idea too, and I found this:

    https://tourandride.com/cases-and-ac...ps-pair-detail

    Exactly what I need!

  4. #4
    apriliaforum expert
    Join Date
    Apr 2011
    Location
    Clearwater, Fl
    Posts
    8,221
    Quote Originally Posted by dleasman View Post
    Thanks for the tips.
    I was able to get a full parts diagram off the AF1 site, and save it. I had not found this document previously, but is now part of my Beo500GT docs collection.

    Unfortunately, there is minimal information in the parts list for the side cases.

    Giving was a great idea too, and I found this:

    https://tourandride.com/cases-and-ac...ps-pair-detail

    Exactly what I need!
    If you could measure them and let me know the length that would be great. Its been a few years since I have looked however I am not sure its a one size fits all situation and would be nice if it was.

  5. #5
    apriliaforum Member dleasman's Avatar
    Join Date
    Mar 2011
    Location
    Mankato, MN USA
    Posts
    99
    Click image for larger version. 

Name:	IMG_20190615_181741.jpg 
Views:	10 
Size:	96.7 KB 
ID:	382803

    The length is just over 10.5 inches, or about 270mm.

  6. #6
    apriliaforum Member dleasman's Avatar
    Join Date
    Mar 2011
    Location
    Mankato, MN USA
    Posts
    99
    Quote Originally Posted by dleasman View Post
    I need a part number... For the plastic cable stop for the hard pannier door (stops it from opening too far)
    It's a flexible plastic stem, maybe 6" long, with a loop on each end that hooks to the inside of the lid, and body of the pannier.

    Any chance ANYONE has a part list that would show this part?
    In the end, I was able to repair the one I had. I used an electronic lighter (uses an arch of energy), and was able to "weld" it back together. So far, it's holding just fine.

  7. #7
    apriliaforum expert
    Join Date
    Apr 2011
    Location
    Clearwater, Fl
    Posts
    8,221
    Quote Originally Posted by dleasman View Post
    In the end, I was able to repair the one I had. I used an electronic lighter (uses an arch of energy), and was able to "weld" it back together. So far, it's holding just fine.
    Congratulations - You were fortunate on that one. Perhaps I will break out my plastic welder and try again on mine. I recently put a separate air flow regulator on it that is much more accurate at low flow rates which has made it much easier to do delicate work.

Similar Threads

  1. need a part number... if it exists.
    By fr0st in forum 2012-2019 Tuono V4 - All Variants
    Replies: 16
    Last Post: 11-26-2017, 09:00 PM
  2. 2006 DiTech BBK Part numbers
    By veloracermike in forum Scarabeo 50 Ditech, SR 50 Ditech, SR Factory
    Replies: 11
    Last Post: 08-22-2008, 11:24 AM
  3. Oem part numbers needed
    By Janky in forum RSV1000 Mille, Mille R, and Mille SP (1998-2003)
    Replies: 7
    Last Post: 12-05-2007, 10:22 AM
  4. Part Number Needed
    By scottch in forum RSV Tuono, Tuono R, Tuono Racing, and Tuono Factory (2002-2005)
    Replies: 1
    Last Post: 02-23-2004, 10:21 AM
  5. Need help getting a part number ASAP...thanks
    By vpr80 in forum RSV1000 Mille, Mille R, and Mille SP (1998-2003)
    Replies: 21
    Last Post: 10-02-2003, 07:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •