Page 1 of 5 123 ... LastLast
Results 1 to 15 of 67

Thread: Parting Out: 2011 RSV4 ~6500 miles

  1. #1
    Racing SERVICE Competition Steve / AF1 Racing's Avatar
    Join Date
    Sep 2003
    Location
    Austin, Texas USA
    Posts
    3,355
    Feedback Score
    0

    Parting Out: 2011 RSV4 ~6500 miles

    Parting out the old AF1 Racing RSV4-R. This bike was our A racebike for the 2012, 2013, and 2014 seasons. It saw one trackday in 2015, at COTA, and Ted, the primary rider, decided it wasn't going to get any better than that, so, the bike was 'retired.' An onboard video from the last time the bike was run is at this link on youtube: https://www.youtube.com/watch?v=RL9c01lAE-A

    Since then the bike has sat as decoration in Ted's office, but we decided it was time to let some of these trick parts back out into the world so they can see more use.

    If you see something you want, please PM me your address and I'll reply with a paypal address and price delivered quote. Shipping will be to your confirmed paypal address only.

    All questions will be answered by PM only. Do not call AF1 Racing. Do not email AF1 Racing.

    I'm typing this again, in case someone misses it: Do not call AF1 Racing. Do not email AF1 Racing.
    Last edited by Steve / AF1 Racing; 02-19-2019 at 11:06 AM.
    AF1 Racing, inc / ApriliaForum.com
    9900 North Interstate 35
    Austin, Texas 78753
    direct:512-459-3966 fax:512-482-8319

    Currently:
    '97 RS125 Two Stroke

    Previously:
    '00.5 Mille & '97 RS250.

  2. #2
    apriliaforum prov-nov
    Join Date
    Dec 2014
    Location
    United States
    Posts
    81
    Feedback Score
    1 (100%)
    Dying to see what's coming. Tax return time and all

    Sent from my SM-G955U using Tapatalk

  3. #3
    Racing SERVICE Competition Steve / AF1 Racing's Avatar
    Join Date
    Sep 2003
    Location
    Austin, Texas USA
    Posts
    3,355
    Feedback Score
    0
    Quote Originally Posted by Rags2Rooster View Post
    Dying to see what's coming. Tax return time and all

    Sent from my SM-G955U using Tapatalk
    Thank you for the interest! Will start posting on Monday evening, I'm traveling this weekend, and ran out of time while at the airport.
    AF1 Racing, inc / ApriliaForum.com
    9900 North Interstate 35
    Austin, Texas 78753
    direct:512-459-3966 fax:512-482-8319

    Currently:
    '97 RS125 Two Stroke

    Previously:
    '00.5 Mille & '97 RS250.

  4. #4
    Racing SERVICE Competition Steve / AF1 Racing's Avatar
    Join Date
    Sep 2003
    Location
    Austin, Texas USA
    Posts
    3,355
    Feedback Score
    0
    Ohlins TTX w/.95 spring

    In good shape, still worked fantastic when we last ran it at COTA in July of 2014.

    No real notable wear other than tooling marks on the blue anodized right height adjustment nut.

    $890 delivered, anywhere in the continental USA.

    [We can have this sent to Ohlins USA for a rebuild before shipping it to you. If you decide to go that route $1090 delivered, anywhere in the continental USA.]




    Last edited by Steve / AF1 Racing; 03-06-2019 at 08:02 PM.
    AF1 Racing, inc / ApriliaForum.com
    9900 North Interstate 35
    Austin, Texas 78753
    direct:512-459-3966 fax:512-482-8319

    Currently:
    '97 RS125 Two Stroke

    Previously:
    '00.5 Mille & '97 RS250.

  5. #5
    Racing SERVICE Competition Steve / AF1 Racing's Avatar
    Join Date
    Sep 2003
    Location
    Austin, Texas USA
    Posts
    3,355
    Feedback Score
    0
    Prototype Braketech Anodized aluminum rear brake rotor.

    This rotor was a Braketech prototype that never quite reached production. It served us well for the two seasons it was fitted to the 2011 RSV4 racer, but as the RSV4 has never been a rear braking heavy bike, we can't say how well it would hold up if used as a commuter or touring rotor.

    Retail was projected to have been in the neighborhood of $270

    $175, shipping additional. PM your address for quote.


    AF1 Racing, inc / ApriliaForum.com
    9900 North Interstate 35
    Austin, Texas 78753
    direct:512-459-3966 fax:512-482-8319

    Currently:
    '97 RS125 Two Stroke

    Previously:
    '00.5 Mille & '97 RS250.

  6. #6
    Racing SERVICE Competition Steve / AF1 Racing's Avatar
    Join Date
    Sep 2003
    Location
    Austin, Texas USA
    Posts
    3,355
    Feedback Score
    0
    OEM Aprilia Carbon Fiber Front Fender

    This fender has probably lived it's life at an average speed of over 100mph. Despite that, it's still in passable shape, but would probably benefit from a repair on the RH side arch (stress crack forming from so many front tire changes). There are numerous other chips in the clear coat, mostly notably, and typically, on the bottom front of the forward supports.

    All the mounting holes are in good shape, sturdy and without any scraping or abrasion.

    Retail hovers around $400 for these from Aprilia.

    $90, shipping additional. PM your address for quote.





    AF1 Racing, inc / ApriliaForum.com
    9900 North Interstate 35
    Austin, Texas 78753
    direct:512-459-3966 fax:512-482-8319

    Currently:
    '97 RS125 Two Stroke

    Previously:
    '00.5 Mille & '97 RS250.

  7. #7
    Racing SERVICE Competition Steve / AF1 Racing's Avatar
    Join Date
    Sep 2003
    Location
    Austin, Texas USA
    Posts
    3,355
    Feedback Score
    0
    OZ Front Wheel '02 Spec. Includes '04 onwards rotor spacers.

    This was the "A" front wheel that we raced on for the 2011-2014 season. It's a forged aluminum real deal, Italian made OZ.

    It is technically '01-'02 spec, but includes the caliper spacers needed to allow you to fit it to any '09 or later RSV4 (and '04 and later RSVR)

    It was powdercoated black, versus the original satin blue, and with the exception of a series of paint chips around the edge of the wheel (image below), this wheel could be cleaned up to a very presentable condition without too much effort.

    It is still within spec for axial and radial runout.

    Retail is $900

    $500, shipping additional, PM your address for quote.






    Last edited by Steve / AF1 Racing; 03-06-2019 at 08:03 PM.
    AF1 Racing, inc / ApriliaForum.com
    9900 North Interstate 35
    Austin, Texas 78753
    direct:512-459-3966 fax:512-482-8319

    Currently:
    '97 RS125 Two Stroke

    Previously:
    '00.5 Mille & '97 RS250.

  8. #8
    Racing SERVICE Competition Steve / AF1 Racing's Avatar
    Join Date
    Sep 2003
    Location
    Austin, Texas USA
    Posts
    3,355
    Feedback Score
    0
    OZ Rear Wheel, '02 Spec

    The matching rear to the front wheel above, in generally the same condition, but notably more paint chips, probably due to chain fling and front tire kick up.

    It's a real-deal Italian manufactured OZ.

    It's within spec for axial and radial runout.

    Retail was around $1250

    $600, shipping additional, PM address for quote.

    In the interest of transparency, this wheel is also '02 spec. So it was standard fitment for '01-'03 Mille-R and '02-'05 Tuono Racing. We, of course, used it without issue on our 2011 RSV4, but fitment on ABS equipped bikes will require careful fitment of the rear wheel encoder, and adding shims to the rear encoder sensor, to preserve correct air gap. Further information can be found at this thread



    Last edited by Steve / AF1 Racing; 03-06-2019 at 08:03 PM.
    AF1 Racing, inc / ApriliaForum.com
    9900 North Interstate 35
    Austin, Texas 78753
    direct:512-459-3966 fax:512-482-8319

    Currently:
    '97 RS125 Two Stroke

    Previously:
    '00.5 Mille & '97 RS250.

  9. #9
    Racing SERVICE Competition Steve / AF1 Racing's Avatar
    Join Date
    Sep 2003
    Location
    Austin, Texas USA
    Posts
    3,355
    Feedback Score
    0
    Woodcraft 14 inch Span Spool Stand

    We picked this up only during our final season of racing the RSV4, so it saw only one year of use. As such, the wheels, forks and ground sliders are all in great shape. Fits all V4's, all '04-'09 RSVR, '06-'10 Tuono and all '98-'03 Mille.

    Retail was $120

    $75, shipping additional, PM your address for quote.



    AF1 Racing, inc / ApriliaForum.com
    9900 North Interstate 35
    Austin, Texas 78753
    direct:512-459-3966 fax:512-482-8319

    Currently:
    '97 RS125 Two Stroke

    Previously:
    '00.5 Mille & '97 RS250.

  10. #10
    Racing SERVICE Competition Steve / AF1 Racing's Avatar
    Join Date
    Sep 2003
    Location
    Austin, Texas USA
    Posts
    3,355
    Feedback Score
    0
    Engine. This bike had approximately ~6,500 miles on it across two engines. This was the second engine. It was in use for perhaps the latter 3rd of that mileage.

    It always ran on race mapping and always had the pair valve block off plates installed. The COTA video at the top of this thread was the last time it ran, and as you can hear, it ran great.

    $2,700, shipping additional. PM with address for delivered quote.






    Last edited by Steve / AF1 Racing; 03-13-2019 at 10:10 AM.
    AF1 Racing, inc / ApriliaForum.com
    9900 North Interstate 35
    Austin, Texas 78753
    direct:512-459-3966 fax:512-482-8319

    Currently:
    '97 RS125 Two Stroke

    Previously:
    '00.5 Mille & '97 RS250.

  11. #11
    Racing SERVICE Competition Steve / AF1 Racing's Avatar
    Join Date
    Sep 2003
    Location
    Austin, Texas USA
    Posts
    3,355
    Feedback Score
    0
    OEM Aprilia Carbon Fiber rear fender.

    This fender is a bit of an anomaly. Almost all race used fenders I've ever seen have abrasion on the inside from where the tire expanded and rubbed it. This is the first race-used rear fender that has no signs of that abrasion.

    It's not quite in mint shape, but with only a quick coat of polish, it would be presentable for street use.

    Retail is over $240

    $125, shipping additional. PM your address for quote.




    AF1 Racing, inc / ApriliaForum.com
    9900 North Interstate 35
    Austin, Texas 78753
    direct:512-459-3966 fax:512-482-8319

    Currently:
    '97 RS125 Two Stroke

    Previously:
    '00.5 Mille & '97 RS250.

  12. #12
    Racing SERVICE Competition Steve / AF1 Racing's Avatar
    Join Date
    Sep 2003
    Location
    Austin, Texas USA
    Posts
    3,355
    Feedback Score
    0
    '11-'15 Spec Gyro.

    This is the module that sits in the cut-out in the rear of the fuel tank. Astonishingly, Aprilia now charges over $800 for this part (OEM number 894604)

    In perfect working order.

    $120, shipping additional. PM your address for quote.

    AF1 Racing, inc / ApriliaForum.com
    9900 North Interstate 35
    Austin, Texas 78753
    direct:512-459-3966 fax:512-482-8319

    Currently:
    '97 RS125 Two Stroke

    Previously:
    '00.5 Mille & '97 RS250.

  13. #13
    apriliaforum prov-nov
    Join Date
    Jan 2019
    Location
    Washington
    Posts
    67
    Feedback Score
    0
    pm sent
    2013 Black Tuono v4 APRC - Too much to list...

  14. #14
    apriliaforum Member
    Join Date
    Apr 2013
    Location
    Ohio
    Posts
    193
    Feedback Score
    1 (100%)
    PM sent for airtubes and rizoma chain guard.

  15. #15
    Racing SERVICE Competition Steve / AF1 Racing's Avatar
    Join Date
    Sep 2003
    Location
    Austin, Texas USA
    Posts
    3,355
    Feedback Score
    0
    Quote Originally Posted by tuonofreak View Post
    pm sent
    replied. Thank you.
    AF1 Racing, inc / ApriliaForum.com
    9900 North Interstate 35
    Austin, Texas 78753
    direct:512-459-3966 fax:512-482-8319

    Currently:
    '97 RS125 Two Stroke

    Previously:
    '00.5 Mille & '97 RS250.

Page 1 of 5 123 ... LastLast

Similar Threads

  1. [Shiver] 2011 Shiver part out, 13,201 miles, good running engine
    By wfoerk in forum Aprilia Parts and Accessories for Sale / Wanted
    Replies: 7
    Last Post: 01-22-2017, 07:58 AM
  2. 2011 rsv4 part out!
    By Superhawk44 in forum Aprilia Parts and Accessories for Sale / Wanted
    Replies: 19
    Last Post: 08-28-2015, 10:02 AM
  3. RSV4 quality parts!! less than 5k miles. part out!
    By rsv4kory in forum Aprilia Parts and Accessories for Sale / Wanted
    Replies: 22
    Last Post: 01-24-2015, 08:09 AM
  4. 2011 white rsv4 R part out, spun rod bearing #1, mint!!
    By rsv4kory in forum Aprilia Parts and Accessories for Sale / Wanted
    Replies: 33
    Last Post: 11-03-2014, 04:37 PM
  5. [RSV4] FS: New / Used parts from 2011 and 2013 RSV4 F Models
    By QuickOne in forum Aprilia Parts and Accessories for Sale / Wanted
    Replies: 5
    Last Post: 11-17-2013, 11:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •