Results 1 to 6 of 6

Thread: Chinese starter installation fail. Don't let this be you.

  1. #1
    apriliaforum prov-nov
    Join Date
    Apr 2016
    Location
    Carlsbad, CA, USA
    Posts
    47

    Chinese starter installation fail. Don't let this be you.

    Right after replacing the sprag clutch assembly, the starter decided to die. I popped it open and there was some broken bit inside. The idea of cheap solution and a bit of time pairs well with my current unemployed state. I bought this one:

    https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

    I followed info as seen in this thread: https://www.apriliaforum.com/forums/...hinese+starter

    After a few rounds of grinding I noticed a problem with the starter I got. Though I measured the spacing on the mounting tabs, I failed to notice that axis of the starter spline is different than on the Aprilia starter. See attached photo. I bolted them together back to back. There is no way I would consider mounting this with one bolt. Also, if the starter you are using is ~60mm diameter or larger, I see no way to grind it down without opening up the case but this is not necessarily a deal breaker.

    Can someone confirm what starter they have fitted and working? Any photos of how much was grinded away?
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	chinese starter.jpg 
Views:	10 
Size:	423.7 KB 
ID:	374991  

    Last edited by Racer117; 02-16-2019 at 01:49 AM.
    2007 RXV 450, 1996 Ducati 900SS, 1994 Honda NSR MC28SP, 1993 Honda NSR MC21R, 2002 Yamaha WR426

  2. #2
    apriliaforum expert levisik's Avatar
    Join Date
    Sep 2014
    Location
    Poland
    Posts
    1,522
    thats rather normal, you need adapter to properly attach chineese starter to cases.

    The most important thing is to have starter laying correctly into cases - grinding is necessary
    2006 Aprilia SXV 450
    Tuneboy Cable available in Poland

  3. #3
    apriliaforum expert
    Join Date
    Nov 2008
    Location
    Western Australia
    Posts
    1,653
    Seriously if the Original starter isn't doing it for you, it's not the starter...

    Mapping, set up, and a good battery...

    I've recently built and set up a RXV450 that has the Cold Start solenoid...

    After being set up correctly and with a good battery, a good battery that spins the motor fast is key, the bike starts as fast and as reliably as any bike I have ever seen and is the best starting XV I've dealt with...

  4. #4
    apriliaforum expert levisik's Avatar
    Join Date
    Sep 2014
    Location
    Poland
    Posts
    1,522
    it is easy, but original died, guy wanted to fix it cheap. He is not claiming, that original one is to weak :P
    2006 Aprilia SXV 450
    Tuneboy Cable available in Poland

  5. #5
    apriliaforum prov-nov
    Join Date
    Apr 2016
    Location
    Carlsbad, CA, USA
    Posts
    47
    Quote Originally Posted by levisik View Post
    thats rather normal, you need adapter to properly attach chineese starter to cases.

    The most important thing is to have starter laying correctly into cases - grinding is necessary
    I understand the starter needs to be ground to clear the engine case. Did you make an adaptor/spacer to mount to the case? Looks like mounting tabs on the Chinese starter are a few mm away from case. Any photos? Thanks for info.

    I can go to ebay and buy a new Aprilia starter for less than $90USD but when they state no state "no guarantees, no returns..." I am very hesitant to get it. Obviously not returning the Chinese starter now but at least I could spin it up and know that it works and have the recourse to return it if it didn't.
    2007 RXV 450, 1996 Ducati 900SS, 1994 Honda NSR MC28SP, 1993 Honda NSR MC21R, 2002 Yamaha WR426

  6. #6
    apriliaforum expert dom_sxv's Avatar
    Join Date
    Mar 2009
    Location
    Hellas/Macedonia
    Posts
    696
    The first chinese starter i bought ,same as yours failed in about a 1,5 years of daily riding.
    Replaced all the internalls from a taiwanese starter that made to be used with chinese bikes with stroker kits etc.Made for drag use. Its much more powerfull and almost impossible to failed.
    Its 4 been 4 years since did the job then and its still working as new.

Similar Threads

  1. Let this be a reminder if you don't ride in the winter
    By Pplummer in forum ETV1000 CapoNord (2001-2007)
    Replies: 13
    Last Post: 11-16-2011, 08:06 PM
  2. Don't Let This Happen To You !!
    By futfalc in forum RST1000 Futura (all years)
    Replies: 1
    Last Post: 02-03-2007, 10:16 PM
  3. Morons Anonymous Part 2: Don't Do This
    By team222 in forum ETV1000 CapoNord (2001-2007)
    Replies: 14
    Last Post: 07-01-2004, 05:15 PM
  4. Morons Anonymous Part 1: Don't Do This
    By team222 in forum ETV1000 CapoNord (2001-2007)
    Replies: 2
    Last Post: 06-30-2004, 10:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •