Results 1 to 5 of 5

Thread: Mapping 2?

  1. #1
    apriliaforum newb
    Join Date
    Sep 2018
    Location
    Netherlands
    Posts
    7

    Mapping 2?

    So i wanna install new open mufflers on my falco. But what i read is that for newer aprilia's is that you have to change your mapping 1 to mapping 2 to make it run better

    Now i was wondering if i need to do something on my falco to let it run better with open mufflers? Settings, tuning, updates, etc? I don't believe my old falco has different mappings?

  2. #2
    apriliaforum expert Falcopops's Avatar
    Join Date
    May 2006
    Location
    NOT Townsville Australia unfortunately
    Posts
    1,859
    there are two maps on the original chip, the second (derestricted) map is achieved by cutting a wire (pin 16 I think, but please check)
    "I like to put a little silicone grease on the seals, too, to keep them looking young and fresh like a prom queen." - SoulDaddy

  3. #3
    apriliaforum newb
    Join Date
    Sep 2018
    Location
    Netherlands
    Posts
    7
    Sounds like a simple hack. But yeah i'll check first before i cut wires. Maybe there has been a topic about this here somewhere?

  4. #4
    apriliaforum expert kzmille's Avatar
    Join Date
    Jul 2003
    Location
    North Florida
    Posts
    18,304
    Yeah it has come up once or twice in the last 16 years. Your bike is very different from the newer ones. Electrically it is essentially completely different. You can open the ECU and see what chip you have. If the bike has not been derestricted you can start there but will likely need a different chip for open exhausts.
    This is America. Use your turn signals or WE WILL KILL YOU

  5. #5
    apriliaforum newb
    Join Date
    Sep 2018
    Location
    Netherlands
    Posts
    7
    Oke i found what you were talking about. If you google "derestrict falco" y'll find a lot. The best i found was this page: http://www.oocities.org/sl_mille/derestrict.html, and this one, http://mkro.perso.infonie.fr/FalcoPa...e-Restrict.htm

    Thanks for the help

Similar Threads

  1. Got a Map, Share a Map
    By ssroadrage in forum RST1000 Futura (all years)
    Replies: 1
    Last Post: 06-24-2003, 10:38 PM
  2. re-mapping
    By ib12 in forum RST1000 Futura (all years)
    Replies: 1
    Last Post: 06-10-2003, 02:30 PM
  3. need to get re-mapped
    By squeaki1 in forum RST1000 Futura (all years)
    Replies: 7
    Last Post: 02-06-2003, 04:17 AM
  4. dyno map
    By sway4561 in forum SL1000 Falco Forum (all years)
    Replies: 1
    Last Post: 02-04-2003, 01:19 PM
  5. port map needed for rs125
    By spud in forum Professional Racing Discussion
    Replies: 0
    Last Post: 05-17-2002, 09:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •