Page 1 of 4 123 ... LastLast
Results 1 to 15 of 47

Thread: Falco tail tidy / fender eliminator

  1. #1
    apriliaforum prov-nov FalcoDaz's Avatar
    Join Date
    Jul 2009
    Location
    Cheshire, UK
    Posts
    82
    Feedback Score
    0

    Falco tail tidy / fender eliminator

    Click for Picture library

    I have a number of these made and ready for dispatch. PM me if you're interested in details.
    Last edited by FalcoDaz; 02-24-2018 at 03:42 AM. Reason: Photobucket hosting farce

  2. #2
    apriliaforum prov-nov FalcoDaz's Avatar
    Join Date
    Jul 2009
    Location
    Cheshire, UK
    Posts
    82
    Feedback Score
    0
    These are cut from 2mm stainless steel and require no 'butchering' of the bike or any components, meaning that the bike can be returned to standard condition if required. They utilise the standard indicators and license plate light. Very good price, I'm not trying to make a living out of this! I don't have a limitless supply.

    click for Picture library
    Last edited by FalcoDaz; 02-24-2018 at 03:41 AM. Reason: Photobucket farce

  3. #3
    apriliaforum expert Lttlcheeze's Avatar
    Join Date
    Jul 2005
    Location
    B-More, MD
    Posts
    4,145
    Feedback Score
    3 (100%)
    Nice clean design, and looks like good craftsmanship.

    I'd get one if I didn't already have an Evo. Good luck with the sale.

    (This will probably be bumped to the For Sale section)

    :Cheers:
    '03 Falco Bought New on 4/6/07:
    Custom paint, Powder Coated RSV Swing arm, RSV Shock, Anodized Rear Sets, Ti Hardware, Anodized (Blue) Fork Caps, SL Carbon Cans, SL Carbon Chip, Custom Airbox w/ K&N Filter, Evo Clutch Slave Cyl., CF Front Sprocket Cover, Rear Hugger, & Chain Guard, GP Shifter, Tuono Rear Brake Master Cly., Evo Clutch Slave Cly., Evo Fender Eliminator, RSVR Mirrors (custom mounts), Custom Blue Dash, HID Headlight, Smoked Tail Light Lens, Integrated Turn Signals into Taillight, LEDs in Headlight & Taillight, LEDs Thru-out, SuperSprox +2 Rear Sprocket, Ariete Grips... (i'm sure there is more)

    Bill

  4. #4
    apriliaforum newb
    Join Date
    Jun 2014
    Location
    Streetly
    Posts
    2
    Feedback Score
    0
    Hi these look good. Do you have left, whats the price?
    Cheers

  5. #5
    apriliaforum prov-nov FalcoDaz's Avatar
    Join Date
    Jul 2009
    Location
    Cheshire, UK
    Posts
    82
    Feedback Score
    0
    Hi all,

    I'm getting a little interest in these tail tidies, so am considering getting another small batch made. I'm looking for 5 confirmed orders before I can commit to manufacture, I've currently got 3 interested. If you're aware of anybody who'd like one, get them to get in touch (PM) and I can speed up the order.

    Any of you guys who bought the original batch post some feedback then others know what they're getting.

  6. #6
    apriliaforum expert anzacinexile's Avatar
    Join Date
    Jan 2005
    Location
    UK South Coast
    Posts
    5,608
    Feedback Score
    0
    Quote Originally Posted by Bald-Buzz View Post
    whats the price?
    ??????????
    Chris
    Probability factor now 1:1, normality has been returned. Anything you canít deal with now is your own problem

  7. #7
    apriliaforum newb
    Join Date
    Apr 2015
    Location
    Cincinnati, OH
    Posts
    14
    Feedback Score
    0
    Also interested based on price!
    Bikes:
    2002 Aprilia SL1000 Falco - Silver - Bought May 2015
    1990 Yamaha FZR - 400 - Black (Naked) - Sold Jan 2015
    Cars:
    2002 Lexus IS300 Sportcross - 123k - Bought July 2014
    1995 Miata PEP - 86k - Sold April 2015


  8. #8
    apriliaforum newb
    Join Date
    Jun 2015
    Location
    SW UK
    Posts
    9
    Feedback Score
    0
    Bought one a wee while ago - Tis a great bit of kit and easy to fit

  9. #9
    apriliaforum expert MauriceOz's Avatar
    Join Date
    Dec 2004
    Location
    Sanctuary Point, Australia
    Posts
    2,295
    Feedback Score
    0

    Falco tail tidy / fender eliminator

    I have a modified EVO one, was modified when the bend above the indicators broke from vibration may not have happened if I had not used the original heavy units. So now I have a strip of steel holding the indicators and the evo holding my plate. I like the look of this stainless one but shipping is the killer.
    no matter the brand of bike, the wind is the same.


  10. #10
    apriliaforum expert redratbike's Avatar
    Join Date
    Oct 2009
    Location
    with my modded collectors,Kent,UK
    Posts
    2,955
    Feedback Score
    0
    Quote Originally Posted by anzacinexile View Post
    ??????????
    £££££££££££££££££££££?

  11. #11
    apriliaforum expert Falcopops's Avatar
    Join Date
    May 2006
    Location
    NOT Townsville Australia unfortunately
    Posts
    1,870
    Feedback Score
    1 (100%)
    I'm keen mate, but as others have mentioned it depends on the price, PM please
    "I like to put a little silicone grease on the seals, too, to keep them looking young and fresh like a prom queen." - SoulDaddy

  12. #12
    apriliaforum prov-nov FalcoDaz's Avatar
    Join Date
    Jul 2009
    Location
    Cheshire, UK
    Posts
    82
    Feedback Score
    0
    Apologies all, wasn't getting any email notifications about these posts, have been replying to PMs instead, only now realised I should have made more!

    They're going for £25.00 including delivery. I've only got one left as of this minute, so first to PM will get it. I can get more done in a few weeks if there's still the interest.

    MauriceOz just sent one to Aus $73.00 inclusive!?

    Again really sorry for not noticing all these posts.

  13. #13
    apriliaforum prov-nov FalcoDaz's Avatar
    Join Date
    Jul 2009
    Location
    Cheshire, UK
    Posts
    82
    Feedback Score
    0
    If anybody is serious about the tail tidy, please PM me directly. Currently I don't have any for immediate dispatch, but if I get 5 or more solid enquiries I can get them made probably within a couple of weeks.

  14. #14
    apriliaforum newb
    Join Date
    Jul 2015
    Location
    Brigg/UK
    Posts
    9
    Feedback Score
    0
    Just received mine from Daz, Excellent piece of kit you won't be disappointed.

  15. #15
    apriliaforum Junkie
    Join Date
    Jul 2006
    Location
    Tasmania Australia
    Posts
    251
    Feedback Score
    0

    Falco tail tidy / fender eliminator

    Got mine just in time to say it was a present from the kids for Father's Day.

    A couple of coats of matt black spray paint and one it went. Looks and fitted great.

    Had to be a bit creative adding a reflector so it was still compliant.

    Very happy.

Page 1 of 4 123 ... LastLast

Similar Threads

  1. DIY Tail Tidy/Fender Eliminator
    By Michael Selley in forum 2012-2019 Tuono V4 - All Variants
    Replies: 8
    Last Post: 07-15-2013, 12:55 PM
  2. tail tidy/fender eliminator ???
    By birdy-rs250 in forum RS250
    Replies: 1
    Last Post: 03-17-2013, 01:24 AM
  3. tail tidy/fender eliminator ???
    By birdy-rs250 in forum RS250
    Replies: 5
    Last Post: 10-31-2012, 03:22 AM
  4. FS: Shiver Tail Tidy/Fender Eliminator
    By Sanjay in forum Aprilia Parts and Accessories for Sale / Wanted
    Replies: 2
    Last Post: 11-29-2011, 03:10 PM
  5. Custom Tail Tidy (Fender Eliminator) Work In Progress
    By PSolk in forum 2008-2014 Mana 850 and Mana 850 GT-ABS
    Replies: 22
    Last Post: 10-04-2010, 05:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •