Page 6 of 6 FirstFirst ... 456
Results 76 to 81 of 81

Thread: I Will Be Installing a Different Carb in my Scarabeo (2001) 150

  1. #76
    apriliaforum expert
    Join Date
    Jun 2008
    Location
    RDU/ North Carolina 919 914 4029
    Posts
    6,350
    Carb is in house its huge 30 mm Throttle plate.all other stuff is exact the heater element can be tapped and installed I wont be bothering . but easy to do if desired thers a lil port in use on the new thats not on the old its there on old but not used see pics just ask for set they wont post

  2. #77
    apriliaforum expert
    Join Date
    Jun 2008
    Location
    RDU/ North Carolina 919 914 4029
    Posts
    6,350
    We have noticed hot restarting issues. Huge puffs whit smoke water going down but not outside of bike gonna be hunting piston n cylinder and of course head gasket it could be cracked but no water in oil which is clear light brown ..certainly cannot stay like it is .. This maybe something to do with the low compression test Dennis had a while back water certainly puts a damper on starting especially Hot..

  3. #78
    apriliaforum expert
    Join Date
    Jun 2008
    Location
    RDU/ North Carolina 919 914 4029
    Posts
    6,350
    so weve a head gasket issue /.. I also found the pollini 170 cc kit outta Puerto Rico for 130 bux he has 3 of em ima take one and do head gasket and cyl kit n carb all at once .. next few weeks i hope ..

  4. #79
    apriliaforum newb
    Join Date
    Jun 2018
    Location
    United States
    Posts
    4
    Resurrecting this old thread. I am curious if anyone has tried this Chineese Cvk 26 knockoff and if it is a direct fit.

    https://rover.ebay.com/rover/0/0/0?m...2F112038540039

  5. #80
    apriliaforum expert
    Join Date
    Jun 2008
    Location
    RDU/ North Carolina 919 914 4029
    Posts
    6,350
    any gy 6 carbs etc will require at least the pull throttle cable being replaced around 80 inches. will have a longer adjustment ferule on carb end.. it will fit these funny front cable feed carbs BUT You will not easily go back to a stock carb without returning stock pull cable.. i have a 30 working ok idle and progression not changed the pull cable yet i also moved the stock float bowl with pre heater and stuff on it screws right up and works fine all plugs connected.. also need larger carb end on air box hose

  6. #81
    apriliaforum expert
    Join Date
    Jun 2008
    Location
    RDU/ North Carolina 919 914 4029
    Posts
    6,350
    i have some pics i can send direct

Page 6 of 6 FirstFirst ... 456

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •