Results 1 to 7 of 7

Thread: Aprilia Strada Centre Stand

  1. #1
    apriliaforum expert keithc's Avatar
    Join Date
    May 2007
    Location
    Melksham, Wiltshire, England
    Posts
    3,197

    Aprilia Strada Centre Stand

    Well, I took the pluge and brought a genuine Aprilia centre stand for my Strada.
    The first thing that struck me was the amount of bits that came with it. The kit included the centre stand (which fits with replacable bushes), grease nipples for the centre stand pivots, all nuts and bolts as required and a new side stand and bracket !.
    It took about 1 to 1.5 hours to fit and is relitivlely easy, requireing only basic spanners, socket set and allen keys.
    Total cost from Panda was 99.50 inc VAT and P&P and it arrived 2 days after I ordered it.
    Thanks again Panda, the stand will make maintenance a lot easier.
    Nice touch with the stickers as well

    Keith
    1982 GL1100 Goldwing
    2006 Suzuki Vstrom 1000GT
    2009 Dorsoduro
    2013 Caponord (from 28/9/13)
    https://www.fuelly.com/driver/mzride...ord?fu=6456444

  2. #2
    apriliaforum Junkie Panda's Avatar
    Join Date
    Jul 2006
    Location
    England
    Posts
    381
    Great stuff, when do we get some photos of it on the bike?!

  3. #3
    apriliaforum expert keithc's Avatar
    Join Date
    May 2007
    Location
    Melksham, Wiltshire, England
    Posts
    3,197
    Here goes, hope they turn out OK






    Only minor nigle is that the stand is a bit stiff and needs a little had to get it into the up position.

    Keith
    Last edited by keithc; 06-07-2007 at 04:33 PM.
    1982 GL1100 Goldwing
    2006 Suzuki Vstrom 1000GT
    2009 Dorsoduro
    2013 Caponord (from 28/9/13)
    https://www.fuelly.com/driver/mzride...ord?fu=6456444

  4. #4
    apriliaforum newb
    Join Date
    Oct 2003
    Posts
    3

    Pegaso R reg

    Hi I need a new stand and was wondering if you could send me a link to the item you purchased?

  5. #5
    apriliaforum expert Frodo's Avatar
    Join Date
    Jul 2007
    Location
    Kapiti, New Zealand
    Posts
    2,646
    Has any one tried the Hepco and Becker centre stand? http://www.norrus.net/catalog/produc...oducts_id=5436
    How do they compare to the Aprilia stand?

    I understand that the Trail has more ground clearance than the Strada. Does the same stand fit both?

    At $300 they are quite expensive. Does the centre stand off the previous Pegaso or equivalent F650 fit?

    Thanks
    Frodo
    2015 Shiver
    New Zealand

  6. #6
    apriliaforum expert keithc's Avatar
    Join Date
    May 2007
    Location
    Melksham, Wiltshire, England
    Posts
    3,197
    Sorry dont have a link, I got it from one of the members of this forum, Panda. Dam good chap he is to.
    I understand from other posters here that its to short for the trail model and needs to be extended a bit.

    Keith
    1982 GL1100 Goldwing
    2006 Suzuki Vstrom 1000GT
    2009 Dorsoduro
    2013 Caponord (from 28/9/13)
    https://www.fuelly.com/driver/mzride...ord?fu=6456444

  7. #7
    apriliaforum expert PetrolHead's Avatar
    Join Date
    Jul 2007
    Location
    going somewhere fast
    Posts
    582
    For info on centre stand fitted to my trail see here
    Blue 635d Coupe
    Silver Yamaha MT01

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •