View Full Version : Winter projects complete - new look

02-27-2003, 05:59 PM
No decals
New lion head
R & G frame sliders

<img src="http://members.cox.net/guardog36/Aprilia%20after/cockpit%201.jpg" style="border:0;"/>

<img src="http://members.cox.net/guardog36/Aprilia%20after/left%202.jpg" style="border:0;"/>

<img src="http://members.cox.net/guardog36/Aprilia%20after/slider%20left.jpg" style="border:0;"/>

<img src="http://members.cox.net/guardog36/Aprilia%20after/lion%20front.jpg" style="border:0;"/>

02-27-2003, 06:01 PM
those lionheads look nice, :)

but i do like the look of the numberplates

02-27-2003, 06:05 PM
looks nice. I like the "stripped look." Can you do me a favor and post a tight pic of the front sliders? I want those but I want to see how much needs to be trimmed first. Any problems/tips on the install?


02-27-2003, 06:42 PM
Here is the left side. The scariest part is actually getting started. With some care the hole is about 1 inch in diameter and not bad at all with a Dremel tool.

<img src="http://members.cox.net/guardog36/Aprilia%20after/left%20slider%20tight1.jpg" style="border:0;"/>

<img src="http://members.cox.net/guardog36/Aprilia%20after/left%20slider%20tight2.jpg" style="border:0;"/>

02-28-2003, 01:28 PM
Thanks, Guardog. Nice job on the install, too. Wanna do mine? :lol:

02-28-2003, 02:23 PM
HA HA any time. With this snow it doesn't look like I'll be riding any time soon.:mad:

Smoke Eater 41
02-28-2003, 07:22 PM
I put the R&G sliders on too. I started out with the 1 inch hole and it looked good. The only problem is that you need to remove the bobbin to take the side panel off. I ended up with a 2 1/16 hole so I can leave the bobbins on. I know its bigger but I hardly notice it. You can replace the inners if you really screw it up or change your mind.