PDA

View Full Version : Prankster's Home Page



Prankster
01-17-2006, 09:07 PM
I Am the King of all I see!!! This is where I Rule! I am the Prankster!!!

Prankster
01-18-2006, 06:35 AM
Aprilia Parts List!

1.) Oil Filter: HiFlo HF152 - made in Japan, around $6.50 at local store.

2.) Staintune Exhaust

Staintune Exhaust UK


Barrac (OEM mirrors)

Touratech UK all sorts of accessories inc luggage, lights etc

Touratech US all sorts of accessories inc luggage, lights etc

Skidmarx screens UK

Laminar lip Santa Ana CA(addition to screen)

Secdem Screen (France)
WARNING ! it seems that Secdem aren't known for good customer service or products !!!

Secdem Hugger (France)
WARNING ! it seems that Secdem aren't known for good customer service or products !!!

Bar Ends (UK)

Oil Filter Part No's (Supplied by Ollie so blame him if they're wrong)

OEM (Aprilia) p/n 0256187
PerfForm p/n APR-OF2
K and N Filters p/n KN - 152
AMSoil p/n SMF-121
Champion / Champ Labs p/n RB-X312

Front Wheel Bearing:
Available from many sources
OEM is made by CCVI model is 6005 RS
Search on Google for "6005 wheel bearing"
SKF part number: 6005-2RSI/C3
Sealed spherical roller bearings: 25 mm internal diameter, 47 mm outside diameter, 12 mm thick


Here's a very good Dry Cell high power battery

Odyssey Batteries US

Odyssey Batteries UK

Genmar Bar Risers US (will ship internationaly)

Brake Pads:
EBC Front FA209HH Rear FA266HH
Ferodo Sinster Grip Road Front FDB2006ST Rear FDB2074P
Aprilia Front 8113988 Rear 8113751
SBS Front SBS674 Rear SBS730
Dunlopad Front DP623 Rear DP631
Gooridge Front G169ST-2 Rear G253ST-1
CarbonLorraine Front 2396 A3 Rear 2827 RX



Chain and Sprockets:
Chain 525 110 link the choice is yours ie gold x ring hd etc.
Front sprocket 17t 61600-17 £14.35 inc vat
Front sprocket 16t 61600-16 same price

rear sprocket 35804-45 £17.54

Chain and sprox kit 03589551 £119.60
kit with cheaper chain also available for £106.00
Demon Tweeks UK based worldwide delivery


Powerlet Products (for Euro style electrical sockets and convertors etc)

Aregata4x4 posted this:
Replacement light bulb for standard 1157 brake light:
It is 2357LL - it offers same life as 1157, but is 25% brighter during braking.
The cost is around $2-$3 each.
Available in most autostores.

The Tuneboy UK
The Tuneboy Australia
A very popular tool which allows you to remap the Sagem ECU on a Caponord (more powerfull than a Power Commander)
There are numerous available maps for download and the owner "Wayne" is very helpful

The price for windshield Aprillia is 179.95$ CDN + 30$ shipping For USA.
No tax for you.
For order,please contact Joe 1.888.577.29.29 ( is free )
Best regards.

www.clarysports.com

here's the link for SECDEM http://www.secdem.fr
they also have rear hugger for our love...

at http://www.caporider.com/Parts.shtml,

OEM p/n 0256187
PerfForm p/n APR-OF2
K and N Filters p/n KN - 152
AMSoil p/n SMF-121
Champion / Champ Labs p/n RB-X312
HiFlo HF152 - made in Malasya

Wheel rebuilding in California

http://www.wheel-works.com/

different makes of brakes.
www.bfmmotorcycles.co.uk

are listed in Demon Tweeks
www.demon-tweeks.co.uk

Chain 525 110 link the choice is yours ie gold x ring hd etc.
Front sprocket 17t 61600-17 £14.35 inc vat
Front sprocket 16t 61600-16 same price

rear sprocket 35804-45 £17.54

Chain and sprox kit 03589551 £119.60
kit with cheaper chain also available for £106.00


EBC Front FA209HH Rear FA266HH
Ferodo Sinster Grip Road Front FDB2006ST Rear FDB2074P
Aprilia Front 8113988 Rear 8113751
SBS Front SBS674 Rear SBS730
Dunlopad Front DP623 Rear DP631
Gooridge Front G169ST-2 Rear G253ST-1
CarbonLorraine Front 2396 A3 Rear 2827 RX

thanks. I did some of search too, and I need to comment on your EBC front pad p/n.
The correct p/n is FA209/2 for organic pads and FA209/2HH for metallic pads.

not really, I did check them at the EBC site.
BTW, the front pads are the same as on the Pegaso and BMW F650. BMW p/n 3411 2345 445.
The rear pads are common with the Falco, Tuono, Ducs ST2-3&4, MultiStrada, etc

www.sparkplugs.com

for iridium plugs for your capo.
same plug is listed for all 1000 v twins.

DCPR9EIX NGK IRIDIUM
DCPR9E NGK STANDARD

IXU27 DENSO IRIDIUM TWICE THE PRICE OF NGK

http://www.apriliaforum.com/forums/s...threadid=43811

Capo Numbers

Maybe this has been done but I wanted to put some specs in my phone for pertinent trip info. Can anyone add some good info?
Thanks s2


brake light = 1157 or 2357LL
36/41 psi front/rear
spark = ngk DCPR9E(ix)
sprocket mod=16t aprilia #0236365
chain = 112 links
oil 4.3L=4.50qts=3.82 imp qts
handlebars = 22mm

Got them here http://www.magnecor.com/ it took a couple of emails and a couple of phone calls, and I had them in hand in less than two weeks.

There are several wire options available, I chose the KV85 8.5mm cables.

Oil filter cover O-ring and an oil drain crash washer
________________________________________
Oil filter cover O-ring and an oil drain crash washer.
OEM Part numbers:
Washer D8x16x1.5 > 8121862 $6.99
O-Ring> 0650500 $10.99

BMW uses the same parts for the F650. BMW part numbers:
Washer D8x16x1.5 >46 51 2 345 500 $0.20
O-Ring >11 41 7 654 013 $2.28

with regards to OEM dealers.....i faxed my wish list to EVERY Aprilia dealer in the USA (got the # off the Aprilia site)....yes, thats alot of long distance phone calls.....whereas most of the OEM suppliers were pretty similar in pricing (all back order too), the best deals (in a big way) were found at my home dealer where i purchased the Capo, GP Cycles in San Diego. http://www.gpmotorcycles.com

Hi Magnecor,
Hope you can supply a set of:
KV85 8.5mm cables – first choice
8 mm cables – second choice
7 mm cables – third choice
Spark plug cables for a:

2002 Aprilia Caponord ETV1000
Engine 60 degree V Twin made by Rolodex
Two spark plugs per cylinder

4 wires 15 1/2 inches tip of plug connector to tip of coil connector

Spark Plugs: NGK part number is DCPR9EIX Straight snap lock terminal and boots

Coil: Wire terminal is female, about the same diameter as a spark plug with the terminal nut removed, and an 8.5mm (aprox.) nylon grommet around the terminal that goes into the coil. It doesn’t show in attached pictures, there is a small retaining spring at the end of the terminal.
Boot is angled 45 degrees.
Outside diameter of the coil tower is 15.5 mm tapering to 16 mm.
Following numbers are on the coil:
White sticker around it with the following numbers: 02IG002, 21595179-3, engraved in the plastic cover: PBTP-GF20 (Sagem - made in france)

Year Model Engine Comment Product Type Part Number Description
2003 ETV1000 CAPONORD 1000 All Oil Filter KN-152 Oil Filter

We appreciate your feedback, and we use product requests like yours to help us determine what new products to develop in the future. We will notify you again if any additional products become available for this type of vehicle. More information about our complete line of products is available at www.knfilters.com. Please contact us if you have any additional questions.

Oil filter http://www.scuderiaciriani.com/rx7/oil_filter_study/

NGK DCPR9E IX spark plug oem


http://www.whaccessories.com/EngineCaseProtector.htm
Carbon fiber stuff
hope, it might be useful for you, folks.

www.caporider.com Is a great place to start!
Same as stuff

Perf-form Motorcycle oil filters
The Aprilia models page...
Perf-form Motorcycle Oil filter Aprilia products

I found that OEM sprockets from Aprilia are overpriced so found a good source for front sprocket from the AFAM distributor, Drive Systems at 1-800-290-9040. Front sprockets are 29.95 each (16 or 17 tooth). A good source for rear sprockets is AF1 racing - 49.95. These prices are substantially less than OEM prices.

A good source for brake pads is cyclebrakes.com (or 805-671-5010). I especially like the Galfer "Green" pads. Service from all three of these companies is very good.

Welcome Mac!

http://www.aprilia.com/uk is a great place for you to start. Download the accessories in your native language for all the kit that's factory fit for a Caponord. Quite a bit of it, but the wait can sometimes be long.

1. Sump guard is only available from Aprilia I believe. I have one. It's probably worth the $500 US! Nice piece that truly protects.

2. Aprilia also sells the fairing guards and headlight guard.

3. http://www.hepco-becker.de/index.php also offers Caponord guards.

4. http://www.touratech.de/english/welcome.htm also offers bits and pieces for your bike! Like a folding shifter and more lighting.

5. http://www.hyperpro.com/cgi-bin/index.pl offers firmer suspension springs front and rear!

You can also get a front fender extender, rear wheel hugger from secdem, pro-oiler, etc...

For Italy, try these 2 web sites:

http://www.gixxoracing.com/powercomm...rcommander.htm

http://www.gixxoracing.com/powercomm...lista-2003.htm

The contact in Italy is:
Ivan Merighi, assistenza tecnica
Fast By Ferracci Europe srl - Via Ungheri, 3/c -
40012 Lippo - BOLOGNA - ITALY
Tel.+39-051-726849
Fax +39-051-726879
www.ferracci.it
www.ferracci.com
www.dynojet.com
www.powercommander.com

Electrex regulator PU-ELCTRX-2112-0071 from


Fuel coupling brass chromed
I searched around and found a distributor named Ryan-Herco that DOES stock those part numbers and sells individual pieces. Call (800) 250-4485. They have warehouses all over the US, and some of the stuff may have to be cross-shipped to you. But at least you can get it. The guy I spoke with was Ray in the Phoenix facility

Beau1K
03-11-2006, 01:15 AM
I Am the King of all I see!!! This is where I Rule! I am the Prankster!!!


More like the DORKSTER! :WTF: The Prankster? LAME!