PDA

View Full Version : Stroked crankshaft?



VR-8
08-21-2005, 07:52 AM
Has anyone stroked a crankshaft on the RSV? If you have: how much?

Jet City Racer
08-21-2005, 04:06 PM
If there was sufficient room to move the crank pin out (not sure if there is to start with) you would have to either make shorter rods (expensive) and have shorter skirt pistons (very expensive) or, have spacers made to fit between the crankcase and cylinders. (wouldn't fit in the chassis)

Stick with the big bore. Affordable power increases without increased piston speed. The V60 has all the torque you need. If you want 10% more torque, add 10% bigger slugs. :plus:

VR-8
08-22-2005, 10:16 AM
If there was sufficient room to move the crank pin out (not sure if there is to start with) you would have to either make shorter rods (expensive) and have shorter skirt pistons (very expensive) or, have spacers made to fit between the crankcase and cylinders. (wouldn't fit in the chassis)

Stick with the big bore. Affordable power increases without increased piston speed. The V60 has all the torque you need. If you want 10% more torque, add 10% bigger slugs. :plus:

What bigbore kit are you talking about?

T Davidsson
08-22-2005, 10:21 AM
What bigbore kit are you talking about?

http://www.seacoastsport.com/motors.htm

Im thinking on buying it to :cool:

VR-8
08-22-2005, 11:18 AM
http://www.seacoastsport.com/motors.htm

Im thinking on buying it to :cool:

Maybe we could send our stuff together?

Jet City Racer
08-22-2005, 11:22 AM
Nice plug for Clarkie, free of charge. :cool: