PDA

View Full Version : Not to take away from the RSV R



SupFly
08-03-2005, 11:12 AM
But has anyone seen the new FACTORY Tuono?

Saw one yesterday up-close-&-personal....pretty frigg'n sweet!

clarkie49
08-03-2005, 11:18 AM
new 05 or new 06..........

SupFly
08-03-2005, 11:25 AM
I didn't even think to look or notice. Ran into a buddy of mine up there, so was distracted, not only by him, but the bling...

The bike looks very nice tho! :D

Sorry Clarkie

SupFly
08-03-2005, 11:29 AM
it's an 05

Frankie
08-04-2005, 01:50 PM
Of course it's a '05...we barely see a '06 in italy... :rambo:

Arnie
08-04-2005, 09:37 PM
new 05 or new 06..........

Spill the beans Clarkie! What's in store for 06???

danna
08-05-2005, 03:43 AM
It's supposedly being revealed in MCN next week.

Found this image, wonder if it will look anything like this.
http://www.raptorsandrockets.com/images/ApriliaTuono_R06_e.jpg

hass
08-05-2005, 07:11 AM
It's supposedly being revealed in MCN next week.

Found this image, wonder if it will look anything like this.
http://www.raptorsandrockets.com/images/ApriliaTuono_R06_e.jpgNo, it will have radial brakes for a start!

Marko
08-05-2005, 07:29 AM
No, it will have radial brakes for a start!

Speaking of which. What is the advantage of radial brakes and how did they come about?

SupFly
08-05-2005, 11:44 AM
http://raptorsandrockets.com/news.html

hass
08-05-2005, 12:22 PM
Speaking of which. What is the advantage of radial brakes and how did they come about?

Here you go:

RADIAL CALLIPERS

Radial callipers are the hottest topic for supersport motorcycle riders and motorcycle mechanics. Here is what makes them different and why they are more effective than traditional brakes.

Everybody knows that radial callipers are the hottest technology in the sports bike world in 2003. Over recent years engines, frames, suspensions, and even tyres have been subject to continuous development. Constant technology transfer from the world of motorcycle racing (accelerated by competitions for series derived machines, like the Superbike championship) has given modern supersport machines exceptional performance and the sort of track handling that a GP machine would have envied ten years ago. Braking systems, however, have remained substantially unchanged.

The last major development in brake systems was the introduction of hydraulics and disks back in the sixties. Since then nothing much has happened. New friction linings have appeared and hydraulic pressure ratios between master and slave cylinders have been optimised, but the system itself is the same. Now the arrival of radial callipers has heralded if not a revolution at least a breath of fresh air for high performance sports bikes.
Maybe not everyone knows that Aprilia was the first manufacturer in the world to fit radial callipers to a competition machine. This was back in 1997. The machine was the RSW250 GP, the bike that won the world title for Aprilia with Biaggi, Harada, Rossi and Capirossi. Aprilís new system so quickly demonstrated its worth that today it is used on all competition machines.

If Aprilia was the first manufacturer to believe in radial calliper technology for competitions, then Aprilia was also the first to transfer that technology to production supersport machines in 2002, fitting it to the most powerful and prestigious machine currently made at Noale, the RSV Mille R.

The term "radial" describes the way in which the calliper is fixed to the foot of the fork leg. Whereas conventional disk brake callipers are fixed by bolts perpendicular to the surface of the disk, radial callipers are fixed by bolts arranged around the radius of the disk, from the circumference towards the centre. This fixing system is the only major technical innovation.

This one innovation nevertheless makes a significant difference, because radial callipers are fixed to mountings at both ends of the fork foot, whereas conventional fixing methods leave the calliper floating at the bottom, inevitably permitting a small amount of flexing to occur every time the brakes are applied. Also, with conventional callipers, correct pad positioning depends entirely on the rigidity of the calliper itself; radial callipers on the other hand are secured rigidly. This eliminates the possibility of flexing and allows the brakes to work in a more controlled, precise manner.

Since the force applied by the brakes is offset with respect to the calliper fixing points, when the brakes are applied a moment of torque is generated which tends to rotate the calliper (in practice it is as if the calliper tends to rotate towards the inside or outside of the wheel). The improved rigidity of radial callipers effectively opposes this moment. Because system rigidity is essential for good braking, radially fixed callipers are inevitably superior to conventionally fixed callipers.

But does the rider really notice any difference? Absolutely, yes. Even if not so much in terms of total braking power (even conventional systems can deliver excellent braking power), there is a clear improvement in precision, lever response, braking control, and fatigue resistance. Thanks to the excellent rigidity of radial calliper fixing systems, the brakes respond far more precisely to lever input, meaning absolute precision control. Minimised system deformation also means that efficiency remains constant even after repeated hard braking, as occurs under track and competition conditions. As an added extra, radial callipers hold the pads in perfect alignment with the disk. This distributes wear evenly and extends pad life. The rider therefore benefits not only from improved braking performance but also from reduced brake maintenance costs.

Marko
08-05-2005, 01:08 PM
Interesting that they didnt mention the ease of changing rotor size with a radial mount. The radials we had on our 250 had only one advantage and that was because with just a quick swap of some spacers we could change the rotor diameter. Feel and power were the same.