PDA

View Full Version : first top end rebuild



smokey_rs250
01-29-2005, 06:01 PM
Today i changed my original barrels, heads and pv assembly for another pair, with o-ring mod and some other mods (see below)

Original pv's were very dirty when I took of the cylinders, lots of carbon build up and lots of black sludge. Pistons were ok, cleaned them and a fresh set of piston rings and put everything back together.

Fired up easy (after kicking like a madman with the killswitch off... :( :( )

Now have to find me someone with lots of knowldge of rs/rgv's and a dyno to set her up.