PDA

View Full Version : rear wheel stand



kiddkool69
04-29-2003, 12:21 PM
anyone have one that fits the rs-50, or know where to get one?

armourbl
04-29-2003, 12:41 PM
As far as I know, all you can do is get the one size fits all stand and bend it to fit the RS.

You can drill holes and tap them to receive stand spools. Probably the best way to lift your bike, but it has also already been proven that in a crash the spools will damage the steel swing arm.

ben

kneedraggingchick
04-29-2003, 09:40 PM
You can get a lockheart Phillips rear stand and bend it. It bends easy (scary) and can bend back if you need to. I dont know if you would want to do that a lot of times, but if you only going to use it on your RS then no problem! You can get the stands for about $70.00 or so.

steveo
04-30-2003, 04:48 AM
I have some large conduit and pipe benders, so I think I'll try making one this weekend...Heck, the RS50 only weighs nothing!

-Steve :cool:

sooty103
04-30-2003, 06:40 AM
I got front and back paddock stands from <a href="http://www.bigbikebook.com" target="top">bigbikebook.com</a> they are universal ones(so for all bikes)and fit perfect.My Rs50 is the smallest bike ive tried and the biggest is my dads FZR1000.

Sooty103

ysr star
04-30-2003, 10:44 PM
We can get you a pitbull that works well. That is all that we use in the shop. We have ones for the front and rear. Call or email Ed for the price and to order.

Jon

kiddkool69
05-01-2003, 04:28 PM
how much?

Deviltech
05-01-2003, 08:00 PM
i have acces to a lath and a mill at my work so i drilled and taped the axle to accept spools. then a stand that is bent together works great. dont do the swingarm unless you drill through both sides and weld a pin in the swingarm on both sides or like said it will bend the metal