PDA

View Full Version : 12V output from Shiver 900



Finmana
05-03-2019, 12:11 AM
What is the best way to get 12V from Shiver 900 2018?
Which wire or connector, that is active only when ignition key is on, should I choose?
I'd like use it for USB socket.

nz_mana
05-03-2019, 03:46 PM
I took a feed from the tail light wiring under the seat for GPS and daytime running lights. Have not needed to uprate fuse. Joined into the wiring near the tool space

SuperChicken
05-03-2019, 04:36 PM
Behind the fairing is a cable that is the female version of this 379893. It's powered when the key is on.

Finmana
05-04-2019, 12:33 AM
Thank you!
Both are good choices.

flipflop
05-10-2019, 05:47 AM
Du you know what the name of this connector is? Trying to buy the mating part.

g0fwk
05-10-2019, 12:44 PM
It’s a super seal connector.

Ebay.co.uk item number 130988287477

made by AMP

Desert Sky
05-13-2019, 08:10 AM
Behind the fairing is a cable that is the female version of this 379893. It's powered when the key is on.

Where exactly is this plug located? Which side of the bike?

SuperChicken
05-13-2019, 05:26 PM
There are several wires right behind the headlight. The one I posted the photo of has a cap on it, and it's labeled "USB Power"

flipflop
05-14-2019, 02:15 PM
Itís a super seal connector.

Ebay.co.uk item number 130988287477

made by AMP

Perfect, thank you!

flipflop
05-14-2019, 02:18 PM
There are several wires right behind the headlight. The one I posted the photo of has a cap on it, and it's labeled "USB Power"

Ahh.. the text on the label gives a hint of the purpose of the connector :)
Suits my needs!