PDA

View Full Version : 2016 RSV4 limp mode after oft tune



rsv4bc
04-05-2019, 07:46 PM
Hey guys, was wondering if anyone could point me in the right direction

Did some work on the bike all at the same time and went for the first ride on it and it will not go over 40 khm and feels

Installed oft map
Installed a 15tooth front sprocket
Installed brand new front and rear tires

My two orange lights do not go off after starting to ride a bit.

Any help would be appreciated.

michaelrc51
04-05-2019, 08:17 PM
Did you recalibrate APRC settings?
Recalibrate throttle?

rsv4bc
04-05-2019, 08:37 PM
throttle was calibrated by the oft

im assuming to calibrate the arpc settings, you mean to ride in 2nd gear at 40 khm? i can not do that since the bike is in limp mode. is there another way todo this?

michaelrc51
04-05-2019, 08:49 PM
I think that's it, honestly I don't remember ....I'd have to look it up.

I would think you need to do something since you changed your gearing and tires.

rsv4bc
04-05-2019, 08:57 PM
ok with the atc turned off it is not in limp mode and works perfectly, im going to try and calibrate it tomorrow like that.

if anyone else has any insight it would be greatly appreciated

SlamDunK
04-05-2019, 10:28 PM
Check wheel sensor?
If they've been off to change tyres perhaps somethings been knocked or the tone wheel's on the wrong side.
Stranger things have happened......

Edit.... thinking about it, the axle prevents that from happenening.
Still, I'd be checking the sensor for damage, position etc.

amauri
04-05-2019, 11:00 PM
the tone wheel's on the wrong side.

Front wheel installed backwards, seen that a few times.