PDA

View Full Version : Question about the SC Project Oval Racing for my2017+



vmax300
02-05-2019, 03:02 PM
Hello guys,

i purchased the SC Project Oval Racing for my 2018 RSV4 RR.
The 2016 model has a separate exhaust hanger, 2017+2018 NOT!

Only midpipe and exhaust.

Is there a problem that the exhaust can rotate on the midpipe? Would be worse for the Swingarm.

Thank you.

https://abload.de/img/geil6-kopiezajsn.jpg (http://abload.de/image.php?img=geil6-kopiezajsn.jpg)

Paranoiac
02-05-2019, 04:20 PM
I do not know how to answer your question, with the springs you should not turn the exhaust, but look at my threads



https://www.apriliaforum.com/forums/showthread.php?348999-Sc-project-oval-problem-rsv4-2017-2018

https://www.apriliaforum.com/forums/showthread.php?348648-Is-this-exhaust-pipe-compatible-with-my-bike-SC-PROJECT

murphc13
02-05-2019, 04:48 PM
No way would it rotate.Its secured at the header exit and the footpeg.The pipe is held tight by those 2 exhaust springs.
Do you remember how much you needed to pull on the springs to get them in place?
No way it’s gonna rotate.

vmax300
02-06-2019, 02:26 AM
No way would it rotate.Its secured at the header exit and the footpeg.The pipe is held tight by those 2 exhaust springs.
Do you remember how much you needed to pull on the springs to get them in place?
No way it’s gonna rotate.

I mean not the midpipe, the midpipe is fixed. I mean the exhaust on the midpipe exit.

murphc13
02-06-2019, 03:39 AM
I mean not the midpipe, the midpipe is fixed. I mean the exhaust on the midpipe exit.
I know.Is the exhaust end pipe held on by an exhaust spring either side of the mid pipe?

vmax300
02-06-2019, 09:15 AM
Yes, top and bottom.

murphc13
02-06-2019, 10:04 AM
Yes, top and bottom.
Then surely it won’t rotate.Dont look for reasons to be stressed out;).

Paranoiac
02-06-2019, 01:10 PM
[QUOTE = vmax300; 4527636] Hola chicos,

compré el SC Project Oval Racing para mi 2018 RSV4 RR.
El modelo 2016 tiene una suspensión de escape separada, 2017 + 2018 ¡NO!

Solo midpipe y escape.

¿Hay algún problema que el escape pueda girar en el tubo medio? Sería peor para el Swingarm.

Gracias.

https://abload.de/img/geil6-kopiezajsn.jpg (http://abload.de/image.php?img=geil6-kopiezajsn.jpg)[/CITAR]


Did you fit the connecting tube in the screw hole? Do you have a picture of that area in detail? I had to change mine

thanks