PDA

View Full Version : Shiver 750 vs 950 exhaust



Greenaway
12-19-2017, 11:12 AM
Hi guys I am brand new to this forum so bear with me please. I am trying to find an aftermarket exhaust with decat pipes for the new 900 but havenít seen any available. I read somewhere that the decat pipe for a 750 might work on the 900 but nothing definitive. Does anyone have some wisdom they could share with me?

rule62
12-19-2017, 11:38 AM
Same fitment for decat, but O2 sensors on the 900 are located in the header pipes, so a bolt will need to be placed in the decat bung. Most decat pipes come supplied with the bolt.

Final exhaust cans are directly interchangeable between 750 and 900.

Sent from my HTC6500LVW using Tapatalk

Greenaway
12-19-2017, 01:18 PM
Thank you!! I have scouring the net trying to figure this out. Just have to ask the right people I guess. Thanks again!

nz_mana
12-19-2017, 02:47 PM
Can confirm that the decat and cans for 750 fit the 900. Have just moved the exhaust from my 750 to the new 900.

rule62
12-19-2017, 04:14 PM
Does the 900 have an O2 sensor at the cat/decat pipe as well?

Sent from my HTC6500LVW using Tapatalk

nz_mana
12-19-2017, 08:39 PM
No sensor in the decat - one each in the header pipes only.

rule62
12-19-2017, 08:48 PM
Cool. That jives with what I posted above. Just wanted to make sure I gave proper info, as I haven't seen one, in the flesh, yet.