PDA

View Full Version : Chinese fairings are on!



Maxknuckles
11-10-2017, 03:41 PM
Update to my previous thread: http://www.apriliaforum.com/forums/showthread.php?337104-Chinese-fairings-just-came-in-Check-them-out!

http://i63.tinypic.com/2irrl2p.jpg


Finally got them on.

Quick review

-Paint: I give a B-, obviously not professional when you look up close, scuffs, couple bubbles here and there etc.
-Fit: putting this on sucked balls, mostly because lack of instructions and the hardware they give you. If I knew what order to put the pieces on then this would have been a breeze, but I was constantly putting it together then taking it apart to put together in a better way. For overall once I was done is a B.
-Price: A+ this was like $400 and everyone who sees this bike riding, it looks amazing.

If I had to do it over again, I would stick with these fairings instead of the really nice motozxombi ones. The bike is stored outside a lot and I live in San Francisco, no use putting on $1500 dollar fairings. BUT quality difference is obvious.



Also, anyone know where I can get a silver tank or silver cover for under $200? :p

Viper1
11-10-2017, 09:10 PM
They look decent from the picture....maybe if you were to replace the tank panels with the stock ones it might actually look even better? Otherwise I do like it!

ZX6Rocket
11-10-2017, 11:06 PM
Looks good! Front stand with no rear stand, you are a brave soul!

Gabro
11-11-2017, 01:21 AM
they do looks very nice! could you mind to share the vendor?

scotman623
11-11-2017, 10:18 AM
looks good!!!

Hyper
11-12-2017, 04:40 AM
they do looks very nice! could you mind to share the vendor?


https://www.ebay.com/itm/ABS-Plastic-Fairings-Bodywork-Fit-For-Aprilia-RSV4-2010-2011-2012-2013-2014-C-/252900113709?_ul=IT

ckruzel
11-13-2017, 12:01 PM
on the logos i give them an F-

its just easy to put something close instead of taking the time to use logos that look like they are supposed to, even the a isnt right

everything i have ever bought for my bike has been a quality product

if your talking about motoxcambri thats stuff is garbage as well, all made in china

wrx_02
11-13-2017, 12:18 PM
Any kid that took a graphic design class in high school can recreate the Aprilia logo.
I have to agree with Chris.

stevieboy22
11-13-2017, 01:22 PM
on the logos i give them an F-

its just easy to put something close instead of taking the time to use logos that look like they are supposed to, even the a isnt right

everything i have ever bought for my bike has been a quality product

if your talking about motoxcambri thats stuff is garbage as well, all made in china


This guy knows! He puts out excellent product!

ranman03
11-13-2017, 01:26 PM
I agree.. not the best but good for the price. All that matters is that you are happy.

As for Moto Xp Ricambi not being quality... that is a load of BS. Sorry I know you put out a great product too but Gianluca also does.

--Randy

ckruzel
11-13-2017, 02:54 PM
I agree.. not the best but good for the price. All that matters is that you are happy.

As for Moto Xp Ricambi not being quality... that is a load of BS. Sorry I know you put out a great product too but Gianluca also does.

--Randy

compare it to sharkskinz, its the best out there, the xp stuff is made in china, typical

ZX6Rocket
11-13-2017, 05:57 PM
Racers edge over sharkskinz ;)

Maxknuckles
11-13-2017, 10:43 PM
It is not an exact replica, just a cool scheme with cool font. Looks wise I think it is good looking, the colors and font etc. Sure, if I had to compare it to the real Misano scheme I would give it a way worse grade. Still for the price I think it is unbeatable.

I think calling it garbage is probably over doing it. The fairings look ok, fit ok and the plastic is abs plastic, ok quality.

ckruzel
11-13-2017, 11:53 PM
they would look on par with just proper logos, i myself have never made something that looks close, it has to be the same, its just laziness

my own bike isnt an accurate misano rep but all the logos are

http://www.drippinwet.com/apriliasale/2010_aprilia15.jpg

http://www.drippinwet.com/apriliasale/2010_aprilia14.jpg

Maxknuckles
11-14-2017, 12:44 PM
That looks pretty awesome! Trust me I would have went to you if it cost $500 :p

Bash Hat
01-31-2018, 01:55 PM
That looks pretty awesome! Trust me I would have went to you if it cost $500 :p


For the price those look awesome! Did you get them from this Ebay seller? https://www.ebay.com/itm/Red-Silver-Green-Fairings-For-Aprilia-RSV4-1000-2010-2015-Injection-ABS-Panels/282709558195?hash=item41d2cd83b3:g:4Z8AAOSw5VtZ8oq Z&vxp=mtr

v01d
01-31-2018, 07:05 PM
if your talking about motoxcambri thats stuff is garbage as well, all made in china

I think I would disagree on the 'garbage ' remark. I just bought a set of track fairings from them, with econo painting.
The fit is great.

So why exactly is that garbage?

Where/how do you know it's made in China? My shipping papers all indicated Italy.

Rocketrod01
02-07-2018, 10:44 PM
Sorry for the late reply I have just joined the forum and are after some Chinese fairings for my 2016 RSV4 RF and it says that they fit up to 2015 models the site I am looking at I believe the 15 and 16 models are the same though what model is yours.

Regards

Rod

ranman03
02-08-2018, 03:42 PM
I think I would disagree on the 'garbage ' remark. I just bought a set of track fairings from them, with econo painting.
The fit is great.

So why exactly is that garbage?

Where/how do you know it's made in China? My shipping papers all indicated Italy.


Don't listen to him... he keeps chiming in on MotoXP Ricambi. Maybe a while back they were not as good but as of the last 2 years Gianluca has produced a awesome product and they fit is very good.

I have seen the economy which is good but not great but what do you expect. I got the Elite and it is very impressive.

I've also seen their carbon set in person and it is fantastic.

--Randy

Bash Hat
02-25-2018, 01:55 AM
352207Put mine on today. For $450 the fit was surprisingly good. http://www.apriliaforum.com/forums/webkit-fake-url://88bfb618-bc8f-4ba6-86b0-71e90ebe1595/imagejpeg

AussieRSV4
04-04-2018, 01:08 AM
354646
These are my cheap chinese ebay fairings. AUD$ 550 delivered.
Just needed a good clean and polish as the paint was a bit rough.
They changed the upper cowl design for me at no extra charge.
I also added some extra decals myself just for a laugh.
354647
Had some slight fitment issues, but only had to remove 2 locating lugs/holes in the upper fairings as they didn't allow for the intake ducts.
Overall very happy for the price!

Didka
04-05-2018, 01:12 PM
Only once bought aftermarket street fairings from china..
Direct import...
Was for a Gixxer 750 though.. but paint scheme was up to standard..
Quality is good enough, stickers were all matching...
mounts were correct..
Same hassle as original fairings..
For the price, I wouldn't do different.
For track, there are plenty of options available...
In Europe, I can't praise Motoxpricambi and Sebimoto enough (and sebimoto is for me the way to go, period) since price and quality are up to standard...

amok
04-05-2018, 08:30 PM
At least they correctly spelled Aprilia....

michaelrc51
04-07-2018, 07:28 AM
Currently thinking of picking up a set of Motoxpriacambia street fairings. Im looking for a OEM factory fit but with a different paint scheme.
Im pretty picky about fit and finish.
Would you guys that have them think Id be happy with a set?


Sent from my iPhone using Tapatalk Pro