PDA

View Full Version : rs50 2007



trisaki
05-24-2014, 08:26 AM
hi , just about to fit the head back on a rs50 , radial brake model , looking at the head gasket , does it matter which way up it goes , one side has a slight raised edge around the bore , other way round has a slight indentation , , also does anyone know the torque setting for the 4 bolts , mucho appreciato

RS_Patrick
05-25-2014, 06:11 AM
raised edge should face up.

about 20Nm torque, differs a little depending on what cilinderkit etc.

trisaki
05-25-2014, 07:55 AM
thank you