PDA

View Full Version : SC Project exhaust



mc18
12-09-2013, 12:55 AM
So far this is the best I can get these to fit.
I'm on my second set of connector pipes and still not happy
238199

flightguide
12-09-2013, 01:48 AM
Better go for Leo Vince

mc18
12-09-2013, 02:10 AM
To late already bought these.

Mr.Dorso
12-09-2013, 03:10 AM
When fitting my arrows I had to use a big screw driver and wedge it between frame and the bracket then use it to lever out the bracket from the frame and whilst holding it tighten the bolt that holds muffler bracket, not sure if it's so the same for these though..

mc18
12-09-2013, 09:10 AM
Good to know that other brands need some tweaking as we'll. just disappointing that for the cost they don't fit straight on. The first set of conector pipes the left side wouldn't tighten up enough I could wiggle it off the stock pipe.

Treg
12-15-2013, 04:23 PM
I got the GPR and they fit like a glove...installed under 30minutes.

mc18
12-15-2013, 05:52 PM
238632
After several hours and modifying the muffler brackets this is about as even as I can get them.