PDA

View Full Version : after market levers available



beeney
08-28-2013, 03:11 PM
ordered a pair of these today.the extra adjustment should come in useful.hope they fit!
http://www.ebay.co.uk/itm/V-Trec-acc-f-Moto-Guzzi-Stelvio-08-13-brake-clutch-lever-short-long-pair-/390638060930?pt=UK_Motorcycle_Parts_13&hash=item5af3d7c582

beeney
08-30-2013, 02:49 PM
drat.brake lever doesn't fit.the clutch lever would actually fit either side,the only difference is the span adjuster would be the wrong way up so hopefully something they can remedy.

keithc
08-31-2013, 02:07 AM
You might want to try this company. I got levers for my Dorsoduro and Vstrom 650 and they work really well. Cheap too :)

http://www.ebay.co.uk/itm/Short-Brake-Clutch-Levers-Aprilia-SHIVER-GT-07-13-DORSODURO-750-08-13-Gold-/130960405270?pt=UK_Motorcycle_Parts&hash=item1e7dd93316

Normal length levers are also available.

Keith C

beeney
09-11-2013, 06:35 AM
231500231502after a word with the supplier i now have a nice pair of levers that fit and work.sorry about pic quality

keithc
09-11-2013, 12:16 PM
If you dont mind me asking how much and where from?

Keith C

beeney
09-11-2013, 04:16 PM
hi,
if you click on the ebay link at the top,that will take you to the seller.they've put the price up since I bought them,I paid 90 with postage,which is dear,but cheap compared to the likes of pazzo.To be fair to them,they have corrected the error without any trouble or further expense to me,and now have a listing under aprilia 1200 caponord on ebay.I think however,I would do as you suggest and wait till the chinese do a listing for them.I got a set for my multistrada for less than 40 and you cant tell any difference in the quality.

fredaroony
08-30-2014, 12:35 AM
........

fredaroony
09-02-2014, 02:42 PM
.........

fredaroony
09-09-2014, 06:34 AM
........

keithc
09-09-2014, 04:50 PM
After spending all that money I would expect them to fit and operate properly. Have a set of cheap Chinese ones on my DD and they work and feel good.

Keith C

fredaroony
09-09-2014, 04:56 PM
After spending all that money I would expect them to fit and operate properly. Have a set of cheap Chinese ones on my DD and they work and feel good.

Keith C

Agreed but to be fair, they never listed the Caponord as a model and I took a punt. I'm going to tap out the supplied plunger barrel to fit the OEM shaft.

fredaroony
09-11-2014, 02:27 AM
.............