View Full Version : My06 streetfighter

08-10-2013, 10:00 AM
I recently had a accident on my bike and i wanted to do a streetfighter as a project! Just want some advice on how to put the riser and point me towards the right direction for some headlights and how to wire them. I will post some pictures

08-10-2013, 10:05 AM

08-10-2013, 10:52 AM
ive got some good news and some bad for the question you asked
first the bad the bad news is thats the type of top yoke i was on about what cant be converted to renthals so easly
good news is it cna be just by drilling 2 holes to the size of thew bolts the rissers have in them here is a simple example of the rissers you will need http://www.ebay.co.uk/itm/Universal-Aftermarket-RFX-Handlebar-Handle-Bar-Risers-1-25mm-/310657169376?pt=UK_Motorcycle_Parts&hash=item48549c37e0
just drill the right size holes in the right place and bolt them on then get some renthal bars like these http://www.ebay.co.uk/itm/RENTHAL-7-8-STANDARD-MOTOCROSS-ENDURO-HANDLEBARS-/221029505509?pt=UK_Motorcycle_Parts_13&hash=item33766299e5
you may ask why got for the most expensive bits answer is because these parts i have showed are some of the best and i also have these except i got custom made risers on a cmc machine and ive crashed my bike since i converted mine and i have no handlebar damage at all but i have seen people buy the cheap handlebars and they snap and shatter on impact

as for headlights there are millions to choose from but from the ones i hvae had i would say dominator headlights look and do the best http://www.ebay.co.uk/itm/Dominator-Twin-Headlight-Black-Streetfighter-Custom-Chop-Trike-Headlamp-BNIB-/221259413291?pt=UK_Motorcycle_Parts&hash=item338416b72b
but as i say there is millions ill post some links to where you"ll find some diff types just matters to what type your after
http://www.vsmotoparts.com/all-scooter-moped-parts/lighting?limit=40&p=6 from this page onwards is the universal headlights

08-10-2013, 11:12 AM
Thank you for your help i will order riser and bars tonight! How easy are them headlights to wire up?

08-10-2013, 11:35 AM
Very easy as most have a wiring diagrams with them so makes it very easy

08-10-2013, 11:38 AM
Ok thank you will let you know how its going

08-10-2013, 02:51 PM
How bad is the bike after the crash and how did the crash happen

08-10-2013, 05:13 PM
Not that bad just smashed the front end and to many cracks and snapped bit so want to street fighter it i wantedto ages ago so this is a excuse to do it lol and i was coming down a road slowed down to speed limited i looked at speedo as look up car had stopped imfront and couldnt stop in time

08-10-2013, 05:47 PM
Ahaa I did pretty much same I wrote off the car with my head as the bike didn't touch it I smashed all the rear window caved in the rear bumper then smashed the rear light then the silly woman revered over my bike and me broke 3 ribs and cracked my helmet in 2

I must say streetfighted bikes are a lot easyer to wheelie and a lot comflyer to drive

08-10-2013, 05:55 PM
Oh not good man! And yeaaah defo just the work and money doing it to be honest but be fun doing it

08-11-2013, 08:28 AM
What screen do you have on your bike?

08-11-2013, 09:27 AM
What screen do you have on your bike?

Street fighters have no screen. If you go down the street fighter route, the bike has to look minty clean otherwise it'll look a mess.

08-11-2013, 10:41 AM
I dont mean i screen i mean the bit of plastic which will sit above the lights and protect the speedo from direct hit of rain and sooo on

08-11-2013, 11:25 AM
I dont mean i screen i mean the bit of plastic which will sit above the lights and protect the speedo from direct hit of rain and sooo on

Zav doesnt have one.

08-11-2013, 11:55 AM
Oh ok got it wrong then!

08-11-2013, 01:15 PM
Zav i have just found some second hand dominator lights and the man said they have twin 3 pin connectors or something like that. How do you wire them up as it doesnt come with a wiring diagram

08-11-2013, 03:18 PM
easy 2 wires go one 2 off the 3 connections and them 3 connections decide high beam low beam and shield and non shield its just a trial and error very easy to do tho

ad i do have a screen i just chose not to use it as its a proper dominator twin headlight one whats ment for 600s all the way up to 1400s and can handle up to 220 mph without braking but its just too big

and the speedo dont need covering or anything as there water proof but the wires inside the frame need water proofing and hiding as you can disconnect the key and it will start without key and without the kill switch as im currently doing that as i broke my kill switch

also get polishing the frame makes them look 100x better and dont take much

08-11-2013, 04:02 PM
Ok cheers mate i will look into that thanks for helping me out! One last thing i like the look of the gpr nude panels you have where could i buy them? Will upload some picture during next couple of days as waiting for stuff to turn up now

08-11-2013, 04:11 PM
eBay but there very and I mean very rare to find as not many get spared as the sides are first to die and not worth trying but I got both sides 2 infills for the tank as need new with gpr fairins new raidiator cover as need new and 2 brackets to hold the fairing on all that I got for 50

08-11-2013, 04:13 PM
Bargain then

08-11-2013, 04:52 PM
Yeah the fairings are I think they cost me 4 for both but the other parts you need you need to go through a derbi dealler as there cheap but hard to get took them 3 month to get me 2 brackets for the fairing

08-11-2013, 04:56 PM
Yeah be good to find the fairings but cant find any :(

08-11-2013, 05:09 PM
Look up "derbi gpr fairings" and look for the side fairings for the nude as they don't always put nude at end or don't know what's what

Ill look for some on eBay for ya tomoz after work as I'm on phone at moment and I cba with mobile eBay

08-11-2013, 10:56 PM
Ok cheers mate i will have a look around

08-12-2013, 05:29 AM
Find one on eBay for about 25 but thats all i can find

08-12-2013, 05:34 AM
As for your speedo you don't really need it but if you decide you do need it you have to mount it onto the top yoke ill post pics when I can of how too

08-12-2013, 06:03 AM
I was going to mod the old bracket so the speedo was higher but not too sure if the yolk would hit it when I turned?

08-12-2013, 10:31 AM
229265Just found some nice bars in the local motorbike shop so i got them one step closer

08-12-2013, 11:30 AM
they are nice are they renthals or a cheapo brand

08-12-2013, 11:39 AM
Cheapo brand i guess! Cant really afford the rentals but there do for now! What was you saying about the speedo??

08-12-2013, 03:22 PM
You want to fit it to the top yoke or the top yoke will catch when you turn the handle bars

08-12-2013, 03:24 PM

08-12-2013, 03:26 PM
Oh i see so basically you have made a plate and bolted that on with the riser bolts?

08-12-2013, 06:25 PM
yeah then you have to re route all the cables and you will need a longer clutch cable i got one of a rg125

08-12-2013, 10:40 PM
Ok i will work it out some way or another lol

08-12-2013, 10:51 PM
Why do i have to re route them should they be fine where they are

08-13-2013, 02:31 AM
Because the renthals are taller so some of the cables don't reach unless there re routed

08-13-2013, 02:44 AM
Oh yeah course stupid question to ask haha

08-13-2013, 03:18 AM
Also look into getting some stainless steal brake lines for the front brake as that will need to be changed as its too short but you can get ones you make yourself for 30 so you can get the right lengh

08-13-2013, 03:40 AM
Yeah someone else mention something about them will get that done when bars are all on

08-16-2013, 11:25 AM
Sorry havent posted in few days been really busy with work...i have just brought some headlight brackets which were a pain to get because of the upside down forks but now have them and still waiting for riser to come and just ordering my dominator headlights so should be here next week

08-17-2013, 10:24 AM
I have now fitted bars and riser but wont let me upload picture

08-20-2013, 02:48 PM
Did you uses a back plate

08-20-2013, 03:03 PM
I just bolted them straight on

08-20-2013, 03:14 PM

08-20-2013, 03:19 PM
You'll need a back plate of some sort to fit the clocks

Looks good btw

08-20-2013, 03:22 PM
Whats a back plate

08-20-2013, 03:27 PM
A flat plate of steel under the top yoke being held on by the risers screws so you can weld a bracket onto the plate to hold the dash

I would sh pics but have none of mine

08-21-2013, 07:47 AM
http://i739.photobucket.com/albums/xx33/george668/null_zpsbf939879.jpg having trouble wiring them got confused on the two extra wires

08-21-2013, 12:54 PM
Well with all the wires to be fair got a rough idea

08-21-2013, 01:02 PM
The extra wires are for day time running lights

08-21-2013, 01:06 PM
Ohh okk mate and got any advice on wiring them up

08-21-2013, 03:59 PM
Just had a brain wave, I know you have headlights but...I think msx 125 (Honda Grom) headlight would have really made your bike look nice

08-21-2013, 06:36 PM
Its trial and error withe the wiring I found

and Luke you still after a rx50 might have one you like pm if interested

08-21-2013, 08:26 PM
Wouldn't get a msx headlight cheap yet they are only out. Millions of dominator wiring diagram online just Google it

08-21-2013, 11:42 PM
Ok cheers guy put some pictures up when they are on

08-22-2013, 06:19 AM
When I get home tonight ill post a lot of pics of how I did it all as mines coming apart tonight as I need new head bearings and I've just have my exhaust fall of at 50mph and roll down the road aha

08-22-2013, 08:37 AM
Ok thank you mate be a great help nearly there now! And oh thats not a good thing haha

08-22-2013, 01:54 PM
Here is a few pics most will answer your questions btw most will be upside down and I can't be arsed to sort them

First headlights
Wired like so
low beam
high Beam
Used 2 steel rods make a bit to screw into them on clocks then welded them to a back plate

Last pic

My bike likes eating L plates


08-22-2013, 02:17 PM
That has help some more will get onto it tomorrow

08-22-2013, 02:23 PM
How did you connect it from the wires already on bike and my head lights are different to yours inside? Did you get 4 cables 2 for low bean and 2 for high

08-22-2013, 02:26 PM
I scrapped the cables that came with the headlight and used the ones that came on bike I cut the wires in middle then soldered new connectors on to connect to the head light as the connectors on the builds have 3 points and you only need 2 as a build has 2 ways to light up so you have to have the right one for each beam

08-22-2013, 02:53 PM
Ohhh i got you now lol

08-23-2013, 10:38 AM
http://i739.photobucket.com/albums/xx33/george668/null_zpsf062cba8.jpg getting there

08-23-2013, 10:56 AM
Looking good what else you got to do

08-23-2013, 12:41 PM
Do the clocks tidy cables and that should be it

08-23-2013, 01:53 PM
http://i739.photobucket.com/albums/xx33/george668/null_zpsb3bad93a.jpg http://i739.photobucket.com/albums/xx33/george668/null_zps56b13512.jpg

08-23-2013, 03:04 PM
Looks nice George!

08-23-2013, 03:33 PM
I might start selling kits to do this Ahaa that's 4 people now I've helped do it


Pretty much same aha except I got derbi nude fairings what I may be getting rid off as I cba cleaning them all time

08-23-2013, 04:31 PM
Thanks man took some time lol how much you looking for the panels?

08-23-2013, 04:49 PM
There is 7 pieces for all the fairing and the raid cover has had to be modified to fit as the gpr nude 125 what these fairings is off has a tad diff cradle

Because how rare the Side fairings are about I would say about 150 as the side fairings are hard to find and when they are found there normally about 60 for each side then all the other bits needed to fit them but as I say im only thinking about it as I might be selling the whole bike soon and using my other rs as ive just brought it a load of parts eg airsal 80 kit, 24mm carb, and a brand new arrow exhaust just waiting on bearings for it

08-23-2013, 04:53 PM
Oh fair enough mate let me know i might be intrested

08-23-2013, 04:57 PM
Okays mate the only probs with one of them is the prev owner off them went down road on them

08-23-2013, 04:59 PM
They look like this at moment only a small scratch on the left one but I got it mostly out before I sprayed them


08-23-2013, 05:31 PM
Yeaaah i like them look better then no planels

08-23-2013, 05:36 PM
I'm thinking about turning it into this soon
As I have a spare subframe and 2 spare rear fairings and get the light off and use 2 led builds so I can keep it full time mot

08-23-2013, 05:50 PM
Yeaaaah man looks awsome

08-23-2013, 06:04 PM
Apparently it's totally uncontrolable tho wheelies like mad and is hard to corner fast as your sitting so high up on the rear seat

But by go it looks sexy specialy what's been done for the rear light it's had a custom led light made and the old hole for the old rear light filled in

08-23-2013, 06:45 PM
Yeah looks mental bet its a best to ride! I want to try wheelie my bike now lol

08-24-2013, 03:36 AM
Easiest way to wheelie on is sit in 1st at 7.5 k revs just inside the power band stand up and bounce then as soon as you feel ready bounce open throttle and pull and it will go up

08-24-2013, 04:39 AM
Ok i give it ago hopeully dont go bad lol

08-24-2013, 07:49 AM
You'll only fall off....would only wheelie a shitter.

08-24-2013, 08:01 AM
Yeah might not chance it

08-25-2013, 12:00 PM
http://i739.photobucket.com/albums/xx33/george668/null_zpsf571e135.jpg took her for a little spin everything seemed fine:)

08-25-2013, 02:34 PM
What mm main jet do these bikes have its got a stock carb

08-25-2013, 03:48 PM
What mm main jet do these bikes have its got a stock carb

Depends on pipe, filter, port timing, weather, climate list goes on my friend. Looks good though!

08-25-2013, 04:10 PM
I used to have a 92main jet with a stock engine arrow pipe and 21mm carb so start there and work down as I was running rich with that

08-25-2013, 04:18 PM
Ok mate i give it ago

08-25-2013, 04:20 PM
But it will run crap with the 92 main jet as that will be way too rich but gives you a good starting pint I think fully stock bike is a 78 main jet I think