PDA

View Full Version : specs headbolts ?



mertsxv
11-14-2011, 10:18 AM
What are The specs for torquening the headbolts ,

Grtzz

Danneh
11-15-2011, 04:07 PM
smear with engine oil both bolts and washers.

First torque to all headbolts to 30Nm, in cross pattern, then torque them to 50Nm.
Done!

J_B
11-15-2011, 11:19 PM
Special Tool for one bolt? - measured by degrees not NM?

amauri
11-16-2011, 11:43 AM
Special Tool for one bolt? - measured by degrees not NM?

A normal socket will reach three of the head bolts but one bolt will require a special torque wrench adapter.

The rod bolts are torqued with both N/mm and with an angle gauge, but the head bolts are 30 + 50N/mm as Danneh