PDA

View Full Version : Dumb question: How to remove chain guard?



jmardy
07-10-2011, 12:16 AM
Hi guys,
I searched and found nothing. How the hell do you remove the chain guard. I can get to the one 4mm bolt but the other one seems buried behind the sprocket.
Am I missing something?
Thanks,
-John

DanV990
07-10-2011, 12:50 AM
You can remove the rear wheel to gain access if your tools can not reach the bolt.

jmardy
07-10-2011, 12:55 AM
You can remove the rear wheel to gain access if your tools can not reach the bolt.

Thanks. So you can't remove the chain guard with the wheel in place?:confused:

DanV990
07-10-2011, 01:04 AM
If you do not wish to remove the wheel and the short end of your regular L shaped allen wrench is too long to fit between the sprocket and the swingarm you could cut the short end of the wrench down and make it a bit shorter.

Tifa
07-11-2011, 07:53 AM
Thanks. So you can't remove the chain guard with the wheel in place?:confused:

what's the problem?...it's less than a 5 minute job to pull the wheel out:)