PDA

View Full Version : New rs50/kx135 pics



cafe750
10-31-2010, 10:45 AM
Here are a few more updated pics..........

Crim
10-31-2010, 11:12 AM
Looks good! The picture of the rear mount is kinda crazy!

How did you do your radiator lines? My KX water pump has two outlets and the head has two nipples for coolant lines in. I cant tell from your picture, but do you only have one line into the head? I had considered just going with the stock rs50 radiator and capping one line off the pump and one line into the head, assuming the two passages into the head are connected and I wouldn't be running one side dry.

I'll probably just end up going w/ my two stock KX125 radiators tho.

cafe750
10-31-2010, 11:39 AM
what year is your engine? mine is a 2003, one top inlet and one water pump outlet

the rearsets are originally for nc35 so i had to add an aluminum bracket to mount em....

cafe750
10-31-2010, 11:49 AM
wrong temp sending unit but works for now.....

cafe750
10-31-2010, 01:56 PM
i'm chicken.......9800k=73 mph

Crim
10-31-2010, 02:49 PM
temp sender wont fit into the radiator? Looks like there's a sender already sticking out of the radiator? My KX engine is a 1994, so I guess its a little bit different.

cafe750
10-31-2010, 03:06 PM
senders are in the rad, but using an inline unit, i will look up your engine and see if i can forward any ideas

cafe750
10-31-2010, 03:06 PM
make sure to use motul synthetic

cafe750
10-31-2010, 03:07 PM
32:1=4 oz per gal