PDA

View Full Version : please help zeeltronic



mobbys
04-28-2010, 05:40 PM
hello

i need some help, i have a zeeltronic PDCI and need a map for that.
when i start the motor explosions for the exhaust.

Thanks

2T Institute
04-28-2010, 08:14 PM
engine is firing just before or after TDC and unburnt fuel is igniting in the exhaust. You have to set your base advance correctly.

smokey_rs250
04-28-2010, 09:08 PM
Contact Borut, unit normally comes with a manual and a few std curves, good for a std bike.

Biagio
04-29-2010, 09:09 AM
I know a person that has 3 differents maps, I can ask him for their specs.

rgvsean
05-05-2010, 04:13 AM
Borut is away for awhile.

I got your email but don't understand the problem, you need to send me more info. Are you sure it is wired in correctly etc.

I can send you some maps to program in if that's what you require.

I'll have to see if I can dig them out but they should already be in there.

Also need to know if you have any other modifications on the bike.