PDA

View Full Version : foot pegs



TroyBoy30
03-17-2010, 11:47 AM
I have been looking for foot pegs to replace the stock one cause they don't offer the best grip in the world. I don't want to replace the entire rear sets, just the foot pegs, but I can't find any. Anyone point me in the right direction?

tuono07
03-17-2010, 12:45 PM
Try PJ Parts for the Rizoma line. I'm not sure they will fit the T but PJ will be able to point you in the right direction if not.

TUOWNER
03-17-2010, 02:17 PM
I have a set of these adjustable pegs from Aprilia that I never mounted. I think they sell for like $329 from Aprilia I'll take $200.00 if this is what your looking for?

GC6269
03-17-2010, 02:41 PM
http://www.oberon-performance.co.uk/acatalog/ApriliaTuono1000.html

EditTim
03-17-2010, 06:54 PM
http://www.oberon-performance.co.uk/acatalog/ApriliaTuono1000.html

I ordered these a few years ago, and I have to admit, the stock pegs were grippier. Not sure if it was because of my boots (oxtars/sidis), or what, but the raised knurls on the stock peg locked in my boots much better than the Oberon pegs, whose knurls are rather smooth. I found them to be uncomfortably slippery, and removed them. YMMV...

garrettg
03-17-2010, 07:39 PM
plug

http://www.apriliaforum.com/forums/showthread.php?t=192988

Gone_Ape
03-21-2010, 04:37 PM
I have the Woodcraft non adjustables and they grip very well....I'm not that picky with "exact" peg placement so adjustables weren't necessary for me, but the pegs grip well and hold up in a tip over.....AF1 sells 'em too and you can buy replacement parts individually...

http://www.af1racing.com/store/Scripts/prodView.asp?idproduct=2748

http://i158.photobucket.com/albums/t113/theducatifan/woodcraftpegs.jpg

EditTim
03-23-2010, 07:25 PM
You can get Gilles footpegs (w/o the whole rearset) for $40 that fit the oem rearset...

http://www.oppracing.com/products/760-gilles-tooling-footpeg-conversion-kit/

pdxmille
03-23-2010, 07:36 PM
You can get Gilles footpegs (w/o the whole rearset) for $40 that fit the oem rearset...

http://www.oppracing.com/products/760-gilles-tooling-footpeg-conversion-kit/

That price is just the adapters...with the pegs the kit costs $100 for the two pegs plus the two adapters...didnt want anyone to get confused...

EditTim
03-23-2010, 08:08 PM
That price is just the adapters...with the pegs the kit costs $100 for the two pegs plus the two adapters...didnt want anyone to get confused...

Ah, good catch, my bad.

TroyBoy30
03-24-2010, 08:04 AM
yea that's what I am looking for but that's a bit steep. I don't want to change the orientation of the foot pegs simply change to ones with better grip!

OPRGK150-002 Gilles Tooling Front Footpeg Conversion - Aprilia N/A $120.15 $120.15
Total $120.15



I have the Woodcraft non adjustables and they grip very well....I'm not that picky with "exact" peg placement so adjustables weren't necessary for me, but the pegs grip well and hold up in a tip over.....AF1 sells 'em too and you can buy replacement parts individually...

http://www.af1racing.com/store/Scripts/prodView.asp?idproduct=2748

http://i158.photobucket.com/albums/t113/theducatifan/woodcraftpegs.jpg

Moves pegs up and back 1/2"


I have a set of these adjustable pegs from Aprilia that I never mounted. I think they sell for like $329 from Aprilia I'll take $200.00 if this is what your looking for?

you have a link for these please?