PDA

View Full Version : Odds and ends for sale (carbs, clutchs, inlets etc)



bourney2007
02-15-2010, 08:46 AM
Found loads of old spares when cleaning the garage out which are no longer need so thought i'd offer them up to you guys.

K&N style filter. Paid 15 for it.
Don't ask me if it fits your bike because i don't know lol. I had it on my 14mm carb.
10 posted...?
http://i108.photobucket.com/albums/n9/comp_builder/15022010071.jpg

Clutch basket, face plate and plate holder.
One of the lugs on the plate holder has snapped off (i no longer have the broken lug). Other than that it's in perfect nick, basket and faceplate are usable and maybe someone could fix up the plate holder???
Anyway 15 posted or make me an offer. These arn't cheap and perfect if you're looking for a replacement basket. I paid 40 for a second hand basket, face plate and plate holder to replace this (wouldn't sell plate holder on it's own)
http://i108.photobucket.com/albums/n9/comp_builder/15022010076.jpg

Clutch plates.
Standard plates, nothing wrong with them. Only replaced to upgrade to a heavy duty clutch. Comes with springs. One of the springs is distorted. Could be used i guess but thats up to you.
7
http://i108.photobucket.com/albums/n9/comp_builder/15022010075.jpg


2 carbs.
Both 14mm. One is complete and ready to roll. The other requires a screw for the float bowl and the strap to hold down the choke cable holder. Could very easily make one.
Perfect carb 15
Other carb 12
http://i108.photobucket.com/albums/n9/comp_builder/15022010077.jpg
http://i108.photobucket.com/albums/n9/comp_builder/15022010078.jpg

Aftermarket polini choke lever and cable. I have no idea why i have this, where it's from or what it's for use with but i wouldn't think it would be too hard to make it work on the RS or any bike. May have to swap the cables over if the one provided is too long.
6
http://i108.photobucket.com/albums/n9/comp_builder/15022010079.jpg

Water pump and gasket
Brand new gasket. Nothing wrong with the pump.
8
http://i108.photobucket.com/albums/n9/comp_builder/15022010084.jpg

Jet kits. Never used!
2 for sale. One ranges from 75 - 98 and the other from 100 - 122. Not going up in single sizes though. There are 10 jets in each pack.
All the jets have 6mm threads (for use with 19mm and above PHBG carbs and possibly others)
8 each
http://i108.photobucket.com/albums/n9/comp_builder/15022010072.jpg
http://i108.photobucket.com/albums/n9/comp_builder/15022010073.jpg

Size 92 jet. Used. Good condition.
1 or i'll throw it in with one of the jet packs if the buyer wants.
http://i108.photobucket.com/albums/n9/comp_builder/15022010074.jpg

Polini inlet manifold for a peugeot speedfight
5
http://i108.photobucket.com/albums/n9/comp_builder/15022010082.jpg

Reed cage and polini reeds for a peugeout speedfight
4
http://i108.photobucket.com/albums/n9/comp_builder/15022010080.jpg

Red neon light.
Worked when it was removed but not tried it since. I'll check it works before selling though.
6
http://i108.photobucket.com/albums/n9/comp_builder/15022010083.jpg

2-stroke oil pump body.
Gear, spring and top are all missing. A bit pointless really but one mans scrap is another mans gold eh lol.
Free.
http://i108.photobucket.com/albums/n9/comp_builder/15022010081.jpg

2 standard head gaskets and lower gaskets for derbi engine.
Price of postage.
http://i108.photobucket.com/albums/n9/comp_builder/15022010085.jpg

Air inlet adapters for carb. Came with my 21mm carb kit. Never used.
Price of postage.
http://i108.photobucket.com/albums/n9/comp_builder/15022010086.jpg




Non bike related i've got a pair of 'reedy' jeans for sale. They're much too big for me and i bought them when on a day out so can't return them.
Paid 35 for them!
Never worn.
20 posted.

http://i108.photobucket.com/albums/n9/comp_builder/15022010069.jpg

http://i108.photobucket.com/albums/n9/comp_builder/15022010068.jpg



I also have a shit load of starter motor parts ina bag. No idea if i've got a full motor yet. I'll let you know.

DanHam
02-15-2010, 07:05 PM
Fuck me all them parts, I'm sure your not far off building a new bike! LOL


:kidding:

Dom.C
02-15-2010, 07:15 PM
I lol'd when I saw the jeans :happy:

Anyway good luck, lets hope someone buys the fucking jets :funnypost

DanHam
02-15-2010, 07:17 PM
You may want to mention the waist and leg size of the jeans btw :)

dan kerson
02-16-2010, 12:35 AM
where are you located? I'll ride my Aprilia there and pick up some of that stuff.

newbybiker
02-16-2010, 04:26 AM
where are you located? I'll ride my Aprilia there and pick up some of that stuff.

you might be riding for a while..

bourney2007
02-16-2010, 07:50 AM
where are you located? I'll ride my Aprilia there and pick up some of that stuff.


LOL newby.

I'm in england mate, stoke-on-trent. I could post them out to you but it's at your cost im afraid :(


Oh yeah, will get the size of the jeans.
Shame, they are alright jeans actually but i never tried them on and they just fall off me! lol

dan kerson
02-16-2010, 12:40 PM
LOL newby.

I'm in england mate, stoke-on-trent. I could post them out to you but it's at your cost im afraid :(


Oh yeah, will get the size of the jeans.
Shame, they are alright jeans actually but i never tried them on and they just fall off me! lol

Hey!!! Did you just call me a NEWBY? Us black guys don't like the N word. I knew you were accross the pond I was just messing with you.
:cheers:

newbybiker
02-16-2010, 01:49 PM
Hey!!! Did you just call me a NEWBY? Us black guys don't like the N word. I knew you were accross the pond I was just messing with you.
:cheers:

lmao noo he ment me

name fail D:

MrBatty1
02-16-2010, 02:28 PM
lmao noo he ment me

name fail D:

Smilie Fail :D

bourney2007
02-16-2010, 03:58 PM
Smilie Fail :D


haha pisser!

Dom.C
02-16-2010, 07:38 PM
LOL Dan K.

DanHam
02-17-2010, 04:46 PM
Smilie Fail :D

:funnypost :funnypost :funnypost