PDA

View Full Version : Evo6 full system and side stand



marke75
02-09-2010, 03:02 PM
Hi does any one know what modifications are required to the side stand to fit an EVO6 full system.

Without modifications does the side stand fully retract and does it still touch the collector.

GreaseSnake
02-10-2010, 02:43 AM
I don't know wich sidestand your bike is fitted with, but mine has the "euro-spec" and there is no clearance issue on my 2008 T-F fitted with EVO6.

So from my knowledge, it works fine.
Not a whole lot of air inbetween, but clearence is clearence

Davor41
02-10-2010, 07:33 AM
Mine is also OK.
It's ?06 Tuono.

GreaseSnake
02-10-2010, 10:05 AM
Mine is also OK.
It's ?06 Tuono.

Have you changed scilensers? Mine differs quite from yours in length
(click for larger image)
http://www.geting.se/image.php/176315-tuono1.jpg (http://www.geting.se/viewimage.php?image=176315-tuono1.jpg)

marke75
02-10-2010, 11:11 PM
okay sweet, i just ordered one and cant wait to put it on. Did you notice much difference putting on the full system? How does it sound?
I had Akra slip ons before and they werent that loud- hoping these will sound nice and deep.

amauri
02-11-2010, 01:09 AM
Mine is also OK.
It's ?06 Tuono.

That's not an EVO-6 pipe.

GreaseSnake
02-11-2010, 02:27 AM
okay sweet, i just ordered one and cant wait to put it on. Did you notice much difference putting on the full system? How does it sound?
I had Akra slip ons before and they werent that loud- hoping these will sound nice and deep.

The sound is deep enough, starting the bike outside makes the windows tremble..

Havn't tried stock or anything else in that matter, had th Evo6 mounted since the bike was new :bump:

Davor41
02-11-2010, 03:19 AM
That's not an EVO-6 pipe.

hmmm.
well, that's how i bought it.

so what is it?
it has no homologation marks (it's not street legal) and the pipe is bigger in diameter on inlet side to the muffler than the standard pipe.

I tought it is evo 6.
Now as i look closer it looks more like Aprilia Akrapovic RSVR Full System -#8796999 (8796999)

GreaseSnake
02-11-2010, 04:50 AM
Now as i look closer it looks more like Aprilia Akrapovic RSVR Full System -#8796999 (8796999)

That's my guess too.

You see the difference to my system.

kostas
02-11-2010, 05:11 AM
any way back to our subject it has to pull the side stand a bit out as when you will fit the evo 6 the stand will knock on the pipe my dealer made it to me so i have no clue what he add it to the stand maybe a spacer or so..... good luck and post some pics with the final result

Davor41
02-11-2010, 06:19 AM
Grease - yes i can see the difference, both in pipes and scilensers.
My guess is it is Akrapovic RSVR Full System.
My frend (ex owner) bought the pipes the directly form Akrapovic factory (that's the good thing when you are in Croatia, Akrapovic is just behind the corner :D) and they had no Aprilia markings as they were not bought from Aprilia dealer.

So my mistake, apologies to Mark, thanks to Amauri (once again)

GreaseSnake
02-11-2010, 10:48 AM
any way back to our subject it has to pull the side stand a bit out as when you will fit the evo 6 the stand will knock on the pipe my dealer made it to me so i have no clue what he add it to the stand maybe a spacer or so..... good luck and post some pics with the final result

No such difficulties on my bike, yes it's tight but there is a mm or two in between.

May differ from bike to bike/system to system perhaps

marke75
02-12-2010, 03:42 AM
GreaseSnake do you have yours set up with a power commander or are you using evo6 mapping. Should i have mined tuned using my pc3 or use the evo 6 map?

GreaseSnake
02-12-2010, 07:02 AM
GreaseSnake do you have yours set up with a power commander or are you using evo6 mapping. Should i have mined tuned using my pc3 or use the evo 6 map?

Hi; Have no PC3, ordered the bike with EVO6 from new so according to the retailer the mapping is made for the system. (aprilia map)
Will try my Motty AFR-tuner with individual cylinder mapping later on this season.

I would say a PC3 will be a good idea since no engine is the other one alike. A custom tuned pc3 is never wrong. (My opinion).

Edit: Have you by the way removed the inlet restrictor, in front of the airbox? Recommended!

pizzadude
02-12-2010, 12:31 PM
Davor41 - I hope you didn't pay EVO-6 prices for your cans. EVO-6's are easily twice the price here in the US.

Davor41
02-13-2010, 05:09 AM
Davor41 - I hope you didn't pay EVO-6 prices for your cans. EVO-6's are easily twice the price here in the US.

No worries dude :)
Didn't pay them, they were in the "in the prize" ;) of the bike.

amauri
02-13-2010, 09:05 AM
Davor41 - I hope you didn't pay EVO-6 prices for your cans. EVO-6's are easily twice the price here in the US.

Twice the price of what?
The Akro EVO-6 race system sold by Aprilia USA is $500 more than the std Akro Evolution system Aprilia sells for street use.

pizzadude
02-15-2010, 10:17 AM
Twice the price of what?
The Akro EVO-6 race system sold by Aprilia USA is $500 more than the std Akro Evolution system Aprilia sells for street use.

Yeah, my screw up. I was thinking 1000 bucks for the slip-ons...the EVO is only a few hundred more than the standard full system I guess.

Either way, I'd be pissed if i paid EVO prices and had standard full system...

:cheers: