View Full Version : premix...

04-20-2009, 11:08 AM
Anyone know which is the best way to cap off the oil inlet on the carburator?

04-20-2009, 11:56 AM
A little piece of hose with a bolt in the end to plug it would work fine. Maybe some silicone on the threads but make sure its dry first before running it. Or of you can find a rubber cap the correct size.

04-20-2009, 05:21 PM
Cut the tube, leaving a half inch or so remaining.

Take a match or lighter to the end of the tube. Let burn for a few seconds...then squeeze flat with pliers.

Et voila.....welded shut.

I know I'm going to hear it about a flame near the carb.......I've done it....and lived.