PDA

View Full Version : Aprilia RS 125 Tail tidy



Nicksta90
12-26-2008, 08:52 AM
Just a quick question. I have an aprilia rs 125 06' and was just wanted to check if a 2007 - 08 tail tidy would fit a 06' model. Thanks

RS125W&B
12-27-2008, 04:12 PM
Just a quick question. I have an aprilia rs 125 06' and was just wanted to check if a 2007 - 08 tail tidy would fit a 06' model. Thanks


I do not know if I understood correctly ...:)
however, all the pieces of the model mountain 06-07 on the new model 08 and then the pieces of the model 08 mountain on the model 06-07
:):)

xtreme chaos
12-27-2008, 05:12 PM
yes it will

ive just this past few days fitted a R&G tail tidy to my 08 rs125

and it looks 100% better very impressed with changes well worth doing to the new shape aprilias

Nicksta90
12-28-2008, 07:51 AM
Ok thanks alot for the help guys. I just needed to know because i didnt know whether the fixings would be different. Plus the 06' model was the first new shape rs to be brought out so i thought they had made new changes to the new 07 - 08' models.;).

Here are the 2 tail tidys which appealed to me and are most interested in the 07 - 08 version.

http://cgi.ebay.co.uk/Aprilia-RS125-2007-8-Tail-Tidy-Fender-Eliminator_W0QQitemZ110330178414QQcmdZViewItemQQpt ZUK_Motorcycle_Parts?hash=item110330178414&_trksid=p3286.c0.m14&_trkparms=72%3A1301%7C66%3A2%7C65%3A12%7C39%3A1%7C 240%3A1318

http://www.rg-racing.com/browseType/Tail_Tidies/Aprilia/RS125/LP0032BK.aspx

xtreme chaos
12-29-2008, 04:01 AM
ye its the R&G on mine here's a pic well worth it over OEM tidy


indicators are nicely tucked just below fairing now instead being a big gap which looked silly


the one on ebay looks ok but i went for the name R&G more than anything..

does come with instructions not that they are really needed...


but you will need to remove rear side fairing as 2 screws holding original tail tidy are hidden, which aint a problem its only 6 screws each side to remove

RS125W&B
12-29-2008, 08:50 AM
yes.. because the principals attacks of screws are in rear fairing... my tail was made at home with copper.. is nice

Nicksta90
12-29-2008, 10:11 AM
thanks for the help. I noticed the r&g tidy does look quite neat in that picture but the other tidy looks like it has a smaller surface to it.