PDA

View Full Version : Water Trap??? Air pressure??



WTB
08-12-2008, 07:49 AM
I know it is probablly written somewhere on some post, but my computer time is limited.

I have a few questiion about the "water trap".

What is the needed constant air cfm for my system 06 SR50 Factory Morini??

I am just looking for a little better water trap than the two I have tried.(Kobalt and Parker)

Some filters have different cfm ratings.

Is it a consenus that all the filter elements are to be removed???

Some elements are ":paper like" and others are "solid" ie.(brass)

Does the Aprilia emulsion kits work???

Will the Aprilia kit and an in line filter work in conjunctiion??with each other?? "ANY HELP"?? with the two??

Thanks in Advance!!

Bill

Ciudale
08-12-2008, 10:34 AM
The Aprilia kit and water trap will work together, if you use the manual trap. With the auto trap, the kit will bleed the air out of the line and push out the piston from its socket, so the trap won't close anymore.
Forget about the filters, you have to remove it when you install the trap to ensure proper working. Plus they don't have to filter anything as the air coming from the crankcase is already filtered at the airbox.

WTB
08-12-2008, 11:31 AM
Thanks, I was wanting to confirm. I have been looking at different traps and there are some cfm ratings I was wondering about.

Bill