PDA

View Full Version : V-ring Relocation?



Mr. Scootswell
07-12-2008, 07:01 PM
Would it be worth while or possible to relocate the v-ring that was removed
for derestriction, to a location behind the roller ramp plate? This would push
the pulley out further, allowing the belt to ride higher.

Sean1
07-12-2008, 07:17 PM
Someone correct me if i am wrong but the slide shell /bush ting ( picture #13 http://www.af1racing.com/store/Scripts/prodList.asp?idCategory=1285 ) Does not go behind the roller ramp plate. And as far as i know the V-ring is fit only on the slide shell /bush. The ring would only dangle on that crank.

MisterSprinkles
07-12-2008, 11:49 PM
Would it be worth while or possible to relocate the v-ring that was removed
for derestriction, to a location behind the roller ramp plate? This would push
the pulley out further, allowing the belt to ride higher.

Yes, if you want your bike to run like complete crapp :P

No seriously though this isn't gonna help you. If you want a higher riding belt, get a high riding belt- they're out there. Polini/malossi 'special'

Mr. Scootswell
07-13-2008, 11:52 AM
Ok, I guess this one was a bad idea.