PDA

View Full Version : finished project!



ap03ant
06-08-2008, 12:22 PM
hi, so finally after months of pissin around ive finished my 50, in camel yellow.
custom rear seat cowl, paint job costing 500! exhaust bracket few other little bits and bobs.
just wondered what you guys thought of the job cheers
Ant.

http://s299.photobucket.com/albums/mm294/ap03ant_01/?action=view&current=P080608_1804.jpg

http://s299.photobucket.com/albums/mm294/ap03ant_01/?action=view&current=P080608_180401.jpg

mktn
06-08-2008, 01:25 PM
nice, what have you done with the tank? looks good from the side more shaped and sporty

ap03ant
06-08-2008, 01:27 PM
its a 06 tank on a 02 bike. looks sharper.

luigi1991
06-08-2008, 02:05 PM
sorry but that looks horrible and the fact that there wasnt a camel aprilia tops it for me

No_Fear
06-08-2008, 02:13 PM
even thow i dont like the color you did good job.

Jack Keenan
06-08-2008, 02:40 PM
hi, so finally after months of pissin around ive finished my 50, in camel yellow.
custom rear seat cowl, paint job costing 500! exhaust bracket few other little bits and bobs.
just wondered what you guys thought of the job cheers
Ant.

http://s299.photobucket.com/albums/mm294/ap03ant_01/?action=view&current=P080608_1804.jpg

http://s299.photobucket.com/albums/mm294/ap03ant_01/?action=view&current=P080608_180401.jpg

i think th looks great mate were did you get your rear seat cowl from?

bourney2007
06-08-2008, 03:45 PM
that looks quite good mate. Nice one.

luigi1991
06-08-2008, 03:47 PM
tank really doesnt suit it imo

keeton.
06-08-2008, 04:13 PM
aprilia did do a camel, in either 50's or 125's.

rs50 '03 steve
06-08-2008, 04:16 PM
i know you have probibly shelled out for that back end in some way or another but i think if you got a pointy back end it would compliment the tank.

my two sence

luigi1991
06-08-2008, 04:20 PM
a number 46 one?

keeton.
06-08-2008, 04:22 PM
yeah a rossi rep one

luigi1991
06-08-2008, 05:38 PM
looks shit hot mate, ignore the haters

yes blud!

bradders
06-08-2008, 05:49 PM
jeeez
you did a good job, how long it take you?

Road_Rebel
06-08-2008, 06:08 PM
there no need for putting someones hard work down :( just deppresses people

i think it looks good mate, although if you could somehow sort the gap out underneathe the petrol tank, it would be perfect.


could you not get hold of the later frame?

luigi1991
06-09-2008, 07:08 AM
nobody allowed to have an opinion in this place anymore?

ap03ant
06-09-2008, 08:25 AM
indicators off ebay, 10 think there for a gsxr,
little gap in the tank is annoying no practical way of amending that now.

dunno bout an engine going in a old frame, it to a lot of moding to get the tank to fit as neat as possible, like the petrol tap being on the other side,
experiment tho worth a go.
cheers for comments.

Ant.

luigi1991
06-09-2008, 09:14 AM
There's having an opinion, and then there's you :|

You just like to criticize.

dont get me wrong,
the actual technical side its very good but i just hate the colours

01dabreoo
06-09-2008, 11:17 AM
aprilia did do a camel, in either 50's or 125's.

Proof?

Davido
06-09-2008, 01:20 PM
nobody allowed to have an opinion in this place anymore?

You're allowed an opinion is you phrase it in a way that doesn't sound like an insult. Also, if you do make it sound like an insult, don't backtrack when others disagree with you.

And after you've said you're opinion, you leave other people to give theirs and not keep interrupting the thread.

bradders
06-09-2008, 03:14 PM
You're allowed an opinion is you phrase it in a way that doesn't sound like an insult. Also, if you do make it sound like an insult, don't backtrack when others disagree with you.

And after you've said you're opinion, you leave other people to give theirs and not keep interrupting the thread.:plus::plus::plus:

ap03ant
06-09-2008, 04:12 PM
ye thats them.
there very easy to fit remove the old ones and drill to little holes in the fairings. slot them in and fasten with a nut the over side.

place the wire through the existing whole, thats about.

very easy job.

it took me about 3 months in total should of been done quicker but due to time and money it took longer, plus had to customize most parts which takes time.


Ant.

ap03ant
06-09-2008, 04:21 PM
yup yup

ap03ant
06-10-2008, 02:23 AM
I made the solo seat out of fiber glass, costing about 30 to make, its a long job as it entails a lot of filling and rubbing down to get it smooth, originally i did try and buy a solo seat for an 02 rs125 and adapt that in some way to fit, but it turnt out just to big, i would of had to chop it in half and remove about 3 inches from the middle! solo seats are so hard to come by, and theres such as demand for them cant belive no one produces them!

if your thinking about making one and you want some advice im more than happy to help.

Ant.

calum
02-22-2009, 09:48 AM
woops this was in the wrong thread

aprilia2
02-22-2009, 02:18 PM
didnt no that the 06> tank fitted the old model, looks excelent!!!!!!!!!!

bourney2007
02-22-2009, 02:21 PM
Doesnt, iv you read are reply's everyone was saying about the gap under it....

Still looks good, and why is this post back up lol, its dead old



i thought that. Like 4 old threads have being dragged back up in the last few days lol

calum
02-22-2009, 03:22 PM
yeah it was me is saw the link replied to the old thread instead of the new one craig posted by accident :(