PDA

View Full Version : clocks



bEnNy tReV
05-27-2008, 04:18 PM
any1 no how to attatch some clocks to the bike as iv turned mine streetfighter but i dont no how to attatch the clocks. what about some different clocks like koso etc ?????

DanGPR
05-27-2008, 04:32 PM
http://trailtech.net/vapor.html

mount to the bars. alot of MX/supermoto bikes run this set up and i think its one of the best around.

bEnNy tReV
05-27-2008, 04:37 PM
yer thats what i want to do lol but where do i get the bracket from???

DanGPR
05-27-2008, 05:03 PM
Mate i reckon this will be perfect, providing the internal dimaeter of the clamp is the right size.

http://cgi.ebay.co.uk/Handlebar-Mount-for-Bottle-Cage_W0QQitemZ350061519432QQihZ022QQcategoryZ62132 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

bEnNy tReV
05-27-2008, 05:06 PM
yer not bad lol think the clamps to small, lol dou no any good clok makes . are koso ne good?????

DanGPR
05-27-2008, 05:07 PM
i would get the trail tech computer, and mount it with the bar mounting kit that comes included with the kit.

im not sure of a price, i will have a quick scout about and let you know :)


EDIT: 75 quid, can't go wrong, thought it was going to be alot more than that!
http://www.trailtechproducts.co.uk/store/erol.html

bEnNy tReV
05-27-2008, 05:24 PM
cheers m8 ill get that but what if i dont have mx bars lol cause at the mo ive got my normal clip ons cause i cant get a yoke with the mx clamps can u help me with that ???????????

DanGPR
05-27-2008, 05:32 PM
did you want to mount some like streetfighter bars to make it look like this?

http://img93.imageshack.us/img93/6569/derbi15nc.jpg

If so, talk to Adam Shelton, he did this to his RS80. I'm not sure of the intricacies though.

That _should_ be able to attatch to your clip ons, though.




EDIT: just a thought, measure the diameter of your fork tubes, and how far they are apart, you may be able to use a top yoke off a Derbi GPR nude/senda/aprilia MX, RX etc.

long shot but its worth a go!


http://cgi.ebay.co.uk/Aprilia-RX-50-Top-and-bottom-yoke_W0QQitemZ320218418229QQihZ011QQcategoryZ78417 QQrdZ1QQssPageNameZWD1VQQcmdZViewItemQQ_trksidZp16 38Q2em118Q2el1247

bEnNy tReV
05-27-2008, 05:36 PM
yer i want to make it into a streetfighter but i dont have a yoke with the clamps for mx bars so ive got my clip ons at the moment but i need to find out how to mount a clock onto clip ons,. my bike is the same as the gpr50 nude but with clip ons and no cloks so thats wat im trying to work on lol. can it be done ??????????

DanGPR
05-27-2008, 05:49 PM
some careful drilling

http://www.streetfighterstore.co.uk/universal_risers/581

not ideal, but shouldn't really compromise the integrity of the top yolk.

a rs50 tuono top yolk is going to be fucking hard to come by!
you could try and get a new gen. one from aprilia, will probably rape you for it though.

bEnNy tReV
05-27-2008, 06:02 PM
yer they want 149 quid for it lol look
http://apriliayorkshire.co.uk/catalogue/partlist.jsp?Catalogo=%3D3503&Tavola=%3D15&_NomeImmagine=19825725.gif&_bikename=RS%2050%20Tuono%202003-2004&_pagename=Handlebar

i cant find 1 second hand newear
streetfightering a bike is a pain lol but it looks good . have you seen the pic of the red rs50 streetifhtered on here?????

bourney2007
05-27-2008, 06:03 PM
Link aint working mate.

I think it's bloody nasty of them to charge a 16 year old that much for a shitty piece of metal. Arseholes when they do stuff like that IMO

DanGPR
05-28-2008, 05:01 AM
Good news on the bar mounting issue. Was browsing thru an m&p catalogue this morning and they sell bar risers like the ones i linked to, but they clamp onto your forks. As long as the diameter of your forks is between 35mm and 54mm you should be able to fit them. Will post a link when i am on my computer.

DanGPR
05-28-2008, 06:28 AM
http://www.mandp.co.uk/productInfo.aspx?catRef=523305