PDA

View Full Version : Best roller weights for Leovince zx...



ditech87
11-24-2003, 12:23 PM
I have a aprilia sr 50 ditech which has been fully derestricted and i also have a Leovince zx sports exhaust which i have taken the restrictor out of. I was just wondering what would be the best roller weights for the leovince zx. I would like good acceleration aswell as good top end. What are the standard ones like with the leovince zx?

Cheers

ditech87
11-24-2003, 12:42 PM
Also does anybody know the weight of the sr 50 ditech standard rollers?

NATO-ohjus
11-24-2003, 02:40 PM
org weights are 7,7gr and i dont know which are best with zx, usually lighter but in ditech maybe heavier are better like paul(?) does have.

PAUL
11-24-2003, 03:44 PM
if your scooter is completely stock with a ZX exhausts it would be good to drive around with weights of around 6,5 grams. I have driven around for a while with 6,3 gram weights and they were perfect. The reason why i drive with 8,5 gram weights is because of the Multivar. With the multivar you should increase your weight with about 1 gram. this would mean 7,7+1,0=8,7. I drive around with 8,5 because its better... that's the reason why mine are soooo heavy :P

ditech87
11-25-2003, 06:19 AM
With 6.5 gram rollers in my ditech, roughly what will my top end be?

PAUL
11-25-2003, 11:40 AM
that's impossible to say. Every scooter is different, so telling you what top end you'd get is impossible. The top speed i reached with a stock setup and only a LeovinceZX with 6,3gram rollers was 105km/h on the speedo..

M|t3k
11-25-2003, 06:03 PM
I have now on stock ditech and leo zx 8,8 g rollers and it goes 95km/h on speedo.
with 6,6g it went only 80km/h....