PDA

View Full Version : Do they put things in the holes?



hakan_olsson
01-23-2007, 02:54 PM
..YES..make sure they access the exhaust "port" which can be found in the FRONT of the engine..

Funny. Since 2004 it's been a few hundred posts about checking the gas from the exh. ports. But afaik, only CC has actually showed up with a receipt from the analyzer. On my bike, they didn't do it. I guess they just think, why the hell buy another expensive machine that nobody has time to learn when customers don't give a fart anyway?

Was it done the proper way?

VR-8
01-23-2007, 04:04 PM
You have too much time on your hands.....nerd..;)

/J

hakan_olsson
01-23-2007, 04:18 PM
You have too much time on your hands.....nerd..;)

/J


:plus:



This thread can also be used for explaining what is "head pipes" and "down pipes". (exhaust systems) I thought head pipes are the ones closest to the heads, but I'm not sure. "Down pipes" -- I have no idea. Do you know? :happy:

VR-8
01-23-2007, 04:24 PM
:plus:



This thread can also be used for explaining what is "head pipes" and "down pipes". (exhaust systems) I thought head pipes are the ones closest to the heads, but I'm not sure. "Down pipes" -- I have no idea. Do you know? :happy:


I use "headers...collector....endcans"........don't know what you mean....;)

/J

Anders J.
01-24-2007, 12:19 PM
If your question is, did the work shop measure the CO when doing the TB-sync? In that case the answer is yes.