PDA

View Full Version : My rsv alarm doesnīt work. Any idea?



carloshugo
01-17-2007, 04:24 AM
If anyone knows where can i download the manual for the aprilia anti-theft system because the alarm does not activated and when i activate via remote control it makes three bip sounds.

I donīt Know :confused:

Thanks,,,,,Carlos

locknload
01-17-2007, 12:40 PM
When you say the alarm does not activate what do you mean by this. I am not familiar with the Aprilia alarm but on other alarms i have you push the remote and it bips a couple of times but it still takes a minute or so for the alarm to set itself. Maybe thats where you are having the problem. You are not waiting long enough after pushing the remote to let the alarm set itself up

carloshugo
01-17-2007, 03:29 PM
I will try but, the transmisor doesnīt work untill you get the key on, i think my mechanic make anyhing with any cable.

The batery transmisor is replaced, but when I activate de alarm, in 10 seconds it beguin to sound louder for all the time and I have to disconect again.

When the alarm works well, I activate with 2 sounds (beep) and deactivated with one sound.
Now I try to activate and sounds 3 times, maybe a faillure.

I have loosen the owners manual....:mad:

X-CBR MAN
01-17-2007, 06:39 PM
[ the transmisor doesn´t work untill you get the key on]





If it only works with the key on that means you have the B+ from the alarm unit going to a switched power source instead of directly to battery postive post.

live2ride
01-19-2007, 03:36 PM
If anyone knows where can i download the manual for the aprilia anti-theft system because the alarm does not activated and when i activate via remote control it makes three bip sounds.

I donīt Know :confused:

Thanks,,,,,Carlos
Hi
pm me your email address and i will send you copy of the spanish section from my aprilia alarm manual.
cos the scaned pages are too large for upload on here.:bangwall:
Im not sure what problems you are experiencing i.e. not able to start the bike etc.
But if you still have the override code for your alarm. Then you can reprogram or reset it. This should work as long as there are no hardware problems with the alarm.
Anyway its all in the manual. :bump: