View Full Version : Help me PCIII USB problem

greek driver
01-04-2007, 12:31 PM
The pciii has 3 wires.two of them go to the injectors and the ather one to the TPS.But were do i conect it?Please help with pictures if posible.

01-04-2007, 10:29 PM
The larger plugs should fit inline with the injector plugs, while the smaller TPS wire should tap the MIDDLE wire from the TPS sensor (A wire tap should be included with your PCIII).

When feeding the PCIII wiring, the shorter length injector connector wire AND the TPS connector wire should be fed towards the left side of the bike. The longer injector connector wire should be fed towards the right side of the bike.

The install manual from the website has photos and is actually pretty good EXCEPT, they forget to mention that you should RECONNECT your TPS sensor once the wire tap is in place. D'OH!


01-05-2007, 12:30 AM
The PCIII injector plug with the orange wire goes on the right side of the bike i.e. the front cylinder injector.