Page 1 of 2 12 LastLast
Results 1 to 15 of 22

Thread: 80cc malossi??

  1. #1
    apriliaforum Member
    Join Date
    Jan 2006
    Location
    plymouth, england
    Posts
    93

    80cc malossi??

    because my top end seals have gone and might be a pain in the arse to get
    hold of because of the bb. I have thought of getting the 80cc malossi to
    replace it. would any one recomend it or would you get somthing different.
    I want bigger than 70cc, so i was thinking maybe 75cc top performance or summin! what u rekon?
    Mods to come...
    Exhaust hanger, koso guages

    Mods already done...
    21mm carb and re jet, Arrow system, remote start alarm, 13/43 gearing, tyre paint, Solo seat, db iridium screen, carbonfibre leavers, carbon fibre indicators, carbon fibre bar ends, 70cc big bore, ram-air induction, respray in yellow and blue, 3x airhorns, carbon fibre reeds and performance cage, iridium plug, undertray, plate re print in CF, mk clutch, yellow rim tape, rs grips, wheels re spray in blue, camel track decals, all in one solo seat, carbon fibre mirrors,

  2. #2
    apriliaforum expert olls_1's Avatar
    Join Date
    Jun 2005
    Location
    southampton
    Posts
    684
    you can get one yeah, but when you get it think about how much stress you will put on the bottom end on your engine ( e.g crankshaft and barings). up to you realy but i wouldnt, save up for a rs125!! olls

  3. #3
    apriliaforum Junkie rs1banger's Avatar
    Join Date
    Aug 2004
    Location
    scarboro
    Posts
    283
    my top75(pink) knackered 2 cranks!
    my original crank and i bought the bore kit 2nd hand off a kid who'd snapped his conrod putting a hole in his bottom end
    on the plus side tho it does do 90mph with good reliability now

    so if you get a faster borekit you'd better budget for a race crank and the bottom end rebuild to fit it
    Last edited by rs1banger; 03-13-2006 at 09:33 AM.
    top 75, yasuni hmr2, dellorto 21, malossi inlet, carbon reed, stoppers bent back, timing retarded, polished piston/head/ports, uprated clutch springs, 15 front

  4. #4
    apriliaforum Member divinitygr's Avatar
    Join Date
    Feb 2005
    Location
    Ελλάς (Greece)
    Posts
    151
    my malossi 80cc has just damaged my crank and that very annoying.
    I hope i can fix it soon - my top speed was 120kph (75mph)
    I heared a lot of good things about tp75 red if that helps

  5. #5
    Tecnologia Reparto Corse RS_Patrick's Avatar
    Join Date
    Nov 2005
    Location
    Netherlands
    Posts
    11,989
    Top Performance 75cc (red) is faster than a Malossi MHR Replica wich is btw. not 80cc but only 76,4cc.

  6. #6
    apriliaforum expert Law's Avatar
    Join Date
    Feb 2005
    Location
    Sussex, UK
    Posts
    1,166
    yes the malossi kit is about 76.4cc
    The red top performance and the street top performance kit are both 73.5 cc despite there names.
    I am using the street kit for reliability, as it has twin rings and less agressive porting. depends how often you want to replace the rings in your engine and how much efoort you wanna put into maintaining it.
    2004 RS50 2004-2006
    2001 RS125
    CMP panel filter, SS&CF JL single , 34mm carb, Power Valve, V-ForceIII
    ARD Race fairings, DB Black Screen, Iridium indicators, Carbon Fibre, Clear Brake Lens, Pro-Bolt
    Funniest thing ive seen on here so far, directed at tomrobbo03.
    Quote Originally Posted by f3ieky
    Listen mate, you're as useful to this board as a 1 legged man in an arse kicking contest so fuck off to the pokemon forums.

  7. #7
    Tecnologia Reparto Corse RS_Patrick's Avatar
    Join Date
    Nov 2005
    Location
    Netherlands
    Posts
    11,989

    Exclamation

    Quote Originally Posted by Law
    yes the malossi kit is about 76.4cc
    The red top performance and the street top performance kit are both 73.5 cc despite there names.
    I am using the street kit for reliability, as it has twin rings and less agressive porting. depends how often you want to replace the rings in your engine and how much efoort you wanna put into maintaining it.
    Red is 49,5mm 75cc exactly and has a single piston ring and has a really agresive port timing, the Black one is 49mm and is 73,5cc with a 2 ring piston and a bit less agresive port timing.

  8. #8
    apriliaforum Member
    Join Date
    Jan 2006
    Location
    plymouth, england
    Posts
    93
    so i think i will go for the red. any one now where i can get one of theese?
    Mods to come...
    Exhaust hanger, koso guages

    Mods already done...
    21mm carb and re jet, Arrow system, remote start alarm, 13/43 gearing, tyre paint, Solo seat, db iridium screen, carbonfibre leavers, carbon fibre indicators, carbon fibre bar ends, 70cc big bore, ram-air induction, respray in yellow and blue, 3x airhorns, carbon fibre reeds and performance cage, iridium plug, undertray, plate re print in CF, mk clutch, yellow rim tape, rs grips, wheels re spray in blue, camel track decals, all in one solo seat, carbon fibre mirrors,

  9. #9
    apriliaforum Junkie iron chef's Avatar
    Join Date
    Feb 2006
    Location
    West Sussex
    Posts
    485
    Quote Originally Posted by addjobe
    .... now where i can get one of theese? ...
    What he said ! ! ! and i dont spose you have any pics of your RS? sounds interesting...

    P.S...and do they do a more suttle silver cylinder and head do they? i try and avoid atention seeking mods...

    P.P.S...What a waste of my 100th post!
    Last edited by iron chef; 03-13-2006 at 02:06 PM.
    click thy LINK for thy shizzle

  10. #10
    apriliaforum Member
    Join Date
    Feb 2006
    Location
    oreton,ludlow
    Posts
    114
    ha dude the 80cc kit aparontly just shakes ur bike to hell and will smash ur botom end, so iv bin told + it ant cheep

  11. #11
    apriliaforum Member slutty's Avatar
    Join Date
    Nov 2004
    Location
    Indianapolios
    Posts
    230
    I have the 80 cc..........@ first had the single ringer then went with the double....Im on piston # 2 due to the first time oil injector took a dump.....and the second was from ????? the cylinder has a small score in it from the first blow.....and still ran fine for piston #2 we will see how it does with piston #3...I noticed alot more power with the single ring vs the double but the double last like 10 X longer.........I cant compar it to any other cylinders but than stock.......So, Im happy with it...just got to find a crank to stick back in it ....then Some acuguages are definatly in order to prvent any detonation in the future.
    2003 YAMAHA R1 For sale...........Black and flame.........$7800

  12. #12
    apriliaforum expert Tybersk8er's Avatar
    Join Date
    Jun 2005
    Location
    Flagstaff, Arizona Rides: rs50
    Posts
    715
    Quote Originally Posted by iron chef
    pics
    Here's my pink TP 75...
    http://www.bikepics.com/pictures/388946/
    Pictures of my rs50
    Engine Mods
    Malossi 80cc Street Kit
    Barnett Racing Clutch
    13/47 gearing
    Leo Vince V6 Exhaust
    Mikuni 24mm Carburetor
    Carbon Fiber Reeds
    Engine Fan

    Visual Mods
    Flushmount turn signals
    Headlight mod
    Custom Black and Yellow Dials
    STOCK RS50 EXHAUST FOR SALE

  13. #13
    Banned RiejuR51's Avatar
    Join Date
    Jan 2006
    Location
    Essex
    Posts
    6,214
    Quote Originally Posted by Tybersk8er
    not that you will be able to see it once ur fairing is on, and your engine is so clean! on my rieju the engine is more exposed so it gets dirty n starts to corrode, im not happy!i want my engine looking nice bt theres not much point when it just gets dirty straight away

  14. #14
    apriliaforum Junkie iron chef's Avatar
    Join Date
    Feb 2006
    Location
    West Sussex
    Posts
    485
    WHERE DID YOU BUY THEM FROM????

    i cant find them in england and i cant find a parts list from craig...
    click thy LINK for thy shizzle

  15. #15
    apriliaforum expert samRS's Avatar
    Join Date
    Jun 2005
    Location
    North Norfolk, England
    Posts
    7,306
    Quote Originally Posted by iron chef
    WHERE DID YOU BUY THEM FROM????

    i cant find them in england and i cant find a parts list from craig...
    search for CMP pricelist, there should be a topic made by 'carl' with it in

    My Rides:
    2001 RS125 | 1989 VFR400
    ITS PEANUT BUTTER JELLY TIME!

    You got to have a dream, If you don't have a dream, How you gonna have a dream come true?

    Visit SportsBikesUK.com

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •