Changed my throttal cable and now it smokes

[ADC125]

I changed my throttal cable a few weeks back and ever since my bike has been pumping out smoke from the end can. I've checked the choke but thats not a problem,

When I changed the cable I saw it splits into 2. one for the carb and one down the side on what looked like my oil feed. If I had knocked it or done somin to it could that be the reason that my bikes pumping white smoke out?

I know this is lacking info but its all I know at this time.

Any ideas to why this is?

Many Thanks
ADC

[zzone]

maybe you accidentaly jammed the cable that goes to the oil feeder on max open,or it is being pulled in a certain point
Look at the cable's route to see if it's jammed.

[priller]

Take the oil pump cover off & check that the oil pump is moving properly when you open the throttle & that its adjusted properly.

[ADC125]

Thanks guys, I'll do that on my day off lol.

Many Thanks
ADC