My main 20 amp fuse blew while I was stop at a light. I've gotten home and taken things apart. And have gotten it slightly narrowed down. It blows when the circuit is complete to start the bike. If I have the kickstand up and hit the brake to get it to allow me to start it, it doesn't blow when I pull the brake lever. But if I put the kickstand down and pull the brake lever it goes again. I also tried completely disconnecting the kickstand wire and that doesn't do it. It also won't blow if the kill switch is off and I pull the brake So I don't think it's the brake switch, kill switch or kickstand switch. So where do I go now?