Results 1 to 8 of 8

Thread: Urgent/ service on dash

  1. #1
    apriliaforum newb
    Join Date
    Sep 2016
    Location
    Uk
    Posts
    24

    Urgent/ service on dash

    Hi folks, got a 2011 aprc rsv4r & have just fitted a set of samco hoses.. had to remove the throttle bodies to get to those attached to the coolant manifold & when refitting Iím left with a single connector 😆 (see picture) & a urgent/Service message on the dash
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	72E7CFA2-958A-4232-85E0-A71CB7E26398.jpg 
Views:	7 
Size:	498.4 KB 
ID:	349071  

    Click image for larger version. 

Name:	FB84CCCB-0273-467E-A74E-5435978703B6.jpg 
Views:	10 
Size:	521.5 KB 
ID:	349072  


  2. #2
    apriliaforum newb
    Join Date
    Sep 2016
    Location
    Uk
    Posts
    24
    Sorry re photos, itís the connector between throttle bodies in the 2nd picture

  3. #3
    apriliaforum newb
    Join Date
    Sep 2016
    Location
    Uk
    Posts
    24
    I’ve dug up another picture of said connector.. it may not be the culprit but I’m struggling otherwise to find the cause of urgent & service messages on dash..btw she won’t fire(can’t hear fuel pump)Attachment 349073

  4. #4
    apriliaforum expert
    Join Date
    Jul 2012
    Location
    england
    Posts
    778
    My initial thought was exhaust valve servo, but why would it be there.
    Did you plug in both sets of throttle bodies, is there a clip on the back of that connector?
    Last edited by ianofbhills; 01-03-2018 at 07:55 PM.

  5. #5
    apriliaforum expert
    Join Date
    Jul 2012
    Location
    england
    Posts
    778
    make sure your throttlebodies are connected and free to do their open and close test when you key on and do not catch on anything, like that connector wiring for instance.
    Failing that get yourself the guzzidiag free software and find out what the fault code is
    Last edited by ianofbhills; 01-03-2018 at 07:56 PM.

  6. #6
    apriliaforum newb
    Join Date
    Sep 2016
    Location
    Uk
    Posts
    24
    Quote Originally Posted by ianofbhills View Post
    My initial thought was exhaust valve servo, but why would it be there.
    Did you plug in both sets of throttle bodies, is there a clip on the back of that connector?
    Thanks for the reply m8, I removed throttle body (front) only but other than tilting it forward to get underneath I don’t remember unplugging anything.... maybe I did (this connector), but forgot!!��
    will hav another look later
    Chris

  7. #7
    apriliaforum expert
    Join Date
    Jul 2012
    Location
    england
    Posts
    778
    Click image for larger version. 

Name:	EF738951-C60F-4FE4-9792-B69D8A0CB258.jpg 
Views:	4 
Size:	487.3 KB 
ID:	349101

  8. #8
    apriliaforum newb
    Join Date
    Sep 2016
    Location
    Uk
    Posts
    24
    Thanks Ian, ‘‘twas exactly that..don’t know how I missed it��
    Ran her up for a bit & noticed a coolant leak on the hose from manifold to thermostat!!
    Here we go again ��

Similar Threads

  1. SERVICE on dash after oil change
    By potere in forum 2010-2018 RSV4 - All Variants
    Replies: 3
    Last Post: 08-28-2011, 03:54 PM
  2. service on dash need to turn off
    By scapaman in forum RSV1000 Mille, Mille R, and Mille SP (1998-2003)
    Replies: 10
    Last Post: 08-15-2011, 01:11 PM
  3. Tuono no go "SERVICE" on dash
    By mikesee in forum Tuono 1000 R and Tuono Factory (2006-2010)
    Replies: 8
    Last Post: 03-01-2011, 05:42 PM
  4. "SERVICE" on dash. What to do?
    By Todd S in forum SL1000 Falco Forum (all years)
    Replies: 10
    Last Post: 10-21-2006, 09:15 AM
  5. "service" on dash?
    By fastbydrmike in forum RSVR and RSVR Factory (2004-2009)
    Replies: 4
    Last Post: 11-22-2003, 12:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •