Results 1 to 6 of 6

Thread: Silly bar-end question

  1. #1
    apriliaforum prov-nov
    Join Date
    Sep 2017
    Location
    St Louis MO
    Posts
    64

    Silly bar-end question

    When I bought my '01 Fut a few months ago it came with the standard black Aprilia bar-end on the right side and a brushed steel & red Throttlemeister end on the left side. Basically what you see in the image below - I have the one on the left side of the image and it doesn't do anything special other than look nice, because of course it's on the left side handlebar. The seller also gave me a small box-o-parts that had the other black OEM bar end. (Also, the bike's red, so the red groove in the bar-end matches the rest of the bike.)

    So my options are:

    1) Just ride it as is, with mismatched bar ends.

    2) Remove the Throttlemeister and put the black one back on the left side.

    3) Track down a Throttlemeister throttle lock for the right side and install it. I don't have any immediate plans to do any long-distance highway riding (which is where I assume is where it would be helpful)

    Anyone out there find these things to be worth it for non-touring riding?

    TIA


  2. #2
    apriliaforum Junkie
    Join Date
    Jul 2009
    Posts
    484
    I had extra heavy bar ends on my falco for a while before I lost one on the highway. Can't remember the brand, bought in the US. They looked nice though. Now have R&G bar ends with those slider pads. They're cheap and look nice. And being stainless, don't rust like OEM ones do.

  3. #3
    apriliaforum expert thesprocket26's Avatar
    Join Date
    Oct 2012
    Location
    SW Idaho, USA
    Posts
    835
    I had a throttle lock for a few years, and since installing heated grips, I have removed the throttle lock. I only found it handy to relieve my right hand or make two handed adjustments to gear. Don't confuse throttle lock for cruise control, as they are two very different things. I would not seek out the rest of the throttle lock, as it would most likely leave you with extra pieces if you were to install a whole kit (left bits). I would just place the factory parts back on so it matched. You could also have the factory ends powder coated to match.
    If your idea of sport-touring is multi-position seats, cruise control and electrically-adjustable windshields, youíre probably not Italian and you donít deserve a Futura. - Kevin Duke

    2001 RST1000 Futura

  4. #4
    apriliaforum expert Twinz's Avatar
    Join Date
    Aug 2008
    Location
    Montpelier, VT
    Posts
    1,055
    Twinz - John
    Montpelier, VT

    Gone but not forgotten:
    '04 RST 1000 Futura
    '94 R1100RS
    '84 R100CS
    '76 R75/6 w/S fairing
    '80 Guzzi V50 II
    '73 Guzzi V7 Sport

  5. #5
    apriliaforum expert photoRotor's Avatar
    Join Date
    Mar 2012
    Location
    SE corner of the NW
    Posts
    9,910
    Quote Originally Posted by Twinz View Post


    Yep, that's what I have. Not a cruise control by any stretch, but allows hand-off-the-throttle relaxing for short stretches.
    JD

    '01 Futura

  6. #6
    apriliaforum expert Motech's Avatar
    Join Date
    Aug 2006
    Location
    Santa Cruz, CA
    Posts
    3,036
    Exactly. Good for fidgeting.
    No Matter Where You Are, There You Go!

Similar Threads

  1. Bar end mirrors question
    By 4Italy in forum 2010-2017 RSV4 - All Variants
    Replies: 4
    Last Post: 11-30-2013, 06:01 PM
  2. Easy bar end question
    By oscarpinch in forum SL1000 Falco Forum (all years)
    Replies: 3
    Last Post: 09-27-2009, 04:18 AM
  3. Bar end mirror question
    By wiper in forum Tuono 1000 R and Tuono Factory (2006-2010)
    Replies: 7
    Last Post: 02-01-2009, 11:45 PM
  4. Quick Stupid Question about Bar Ends
    By puppluuv in forum RSV1000 Mille, Mille R, and Mille SP (1998-2003)
    Replies: 2
    Last Post: 04-22-2007, 10:29 PM
  5. Bar end question...
    By Mark in forum RSV1000 Mille, Mille R, and Mille SP (1998-2003)
    Replies: 3
    Last Post: 11-04-2003, 03:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •