Results 1 to 2 of 2

Thread: '04 Rally, turn signals not working?

  1. #1
    apriliaforum newb
    Join Date
    Sep 2017
    Location
    WI
    Posts
    1

    '04 Rally, turn signals not working?

    Hello

    I recently purchased a project '04 Rally. When I bought the scooter it was not running. I found the float to be cracked, replaced it, and everything runs great now. My turn signals however do not work. It appears that the front signals were replaced at some point. From the pictures I've found online of other Rallys, the signals/lens is flush in the front plastic. This scooter has been dropped before (scratches) and I think it has had aftermarket signals installed. The switch on the control panel seemed to stick and look very worn. I bought a replacement used switch on Ebay and plugged it in today. The signals still don't work. All other lights and indication lights work properly, but the signals have nothing. Before I start pulling panels and chasing wires, is there any known issues, or anything that would be helpful to know ahead of time? Thanks

    Aaron

  2. #2
    apriliaforum expert
    Join Date
    Jul 2015
    Location
    ontario
    Posts
    891
    who knows what they did. its not that bad bedause the scoots are wired pretty good. i mean everything you need is under the handlebar plastics. the flasher unit is there too.

    try racingplanet or scoottuning for parts and free shipping. usually a 70cc bbk is all you need if thats a piaggio engine.

    ttys
    --- diploma for engine repair in 2012 ---

    derbi bullet 2006 - piaggio AC - malossi T.C. half - custom GPS dash - TPR 70CC - topperf crank - vl13 reed and spacer- yamaha rt180 kickstand - giannelli shotV4 - phbg 21mm - doppler mesh top venturi filter

    complete wtp volta bmx 2012 - sanko seamless japanese cromoly heat treated and blue printed frame - 21lbs

    1992 lt250r suzuki quadracer - maier plastics -chromed shearer pipe - chromed works suspension - ++++++++ - 220lbs

    previous vehicles - subaru legacy turbo 1991 - mazda mx6 turbo 1990.

Similar Threads

  1. Brake LIghts & Turn Signals not working!
    By ghostrider71 in forum SL1000 Falco Forum (all years)
    Replies: 32
    Last Post: 03-20-2007, 08:53 PM
  2. Rear turn signals not working
    By imaster in forum RSV1000 Mille, Mille R, and Mille SP (1998-2003)
    Replies: 2
    Last Post: 04-14-2006, 06:54 AM
  3. Rear Turn Signals Not Working??
    By pikstarr in forum Scarabeo 50, SR50, Mojito 50, Rally, Fly 50
    Replies: 9
    Last Post: 10-03-2005, 04:18 AM
  4. Help right turn signals not working
    By THUNDERMILLE in forum RSV1000 Mille, Mille R, and Mille SP (1998-2003)
    Replies: 4
    Last Post: 02-05-2004, 04:30 PM
  5. Turn Signals not working
    By Joeyt in forum RSV1000 Mille, Mille R, and Mille SP (1998-2003)
    Replies: 4
    Last Post: 09-17-2003, 11:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •