I have a problem trying to get a starter motor to work on a 1998 SR50LC.
I carried out continuity testing of all wires on from the switches down to the first plug, then to the relay and from the relay to the motor and all wires are working and in tact.
I then tried a new starter motor, still nothing and just to be sure changed the relay.
However, still no turning over of the motor. I can hear the relay 'clicking' but that's as far as it goes.
At the moment I have the loom on the bike and the switches connected, don't think im missing any of the circuit that isn't connected.
Only wiring bits not connected are the indicators, rear light assembly and the headlights...