Page 1 of 3 123 LastLast
Results 1 to 15 of 41

Thread: rsv4/tuono v4 street to track conversion - lots of parts to go

  1. #1
    apriliaforum Member
    Join Date
    Nov 2016
    Location
    Next to a gas station
    Posts
    167
    Feedback Score
    2 (100%)

    rsv4/tuono v4 street to track conversion - lots of parts to go

    Hey guys, just picked up this fresh new baiku, a rsv4 factory which I'm now converting into a full time track bike. The bike came with quite a few spares and was barely ridden (9950km). I've bought and picked up most of the track items I'll need, however I'm getting rid of all the street items which are going to take unecessary space, there's quite a list. Grab yours while they're available:

    I'll consider offers... as long as they're reasonnable.

    1) RSV4 factory fairing which are now split, only these left:
    Left side fairings 120$
    both sides air intake cover 35$
    both side fairing puller 30$

    2) rsv4 STM clutch 450$

    3) rsv4 factory Renthal adjustable clip ons 110$
    rsv4 OEM rear disc rotor 70$
    rsv4 handlebar right switch pre-aprc 10$ 2x units
    rsv4 oem clutch lever mint 30$
    rsv4 handlebar balancer 20$
    rsv4/tuono side warning lights 30$

    4) rsv4 complete clutch with baskets plates and springs etc 100$
    rsv4 radiator fans 20$ (one left)
    rsv4 sprocket cover 20$ 2x units
    rsv4 radiator cap 25$
    rsv4 fairing puller 20$
    rsv4 coolant reservoir 30$

    5) Tuono RACE ECU 380$
    Tuono underbelly fiberglass 70$
    Tuono throttle cables 30$
    tuono v4 clutch cable 20$


    sold items:
    front upper nose sold
    rsv4 handle bar left switch pre-aprc sold
    Rizoma handle bar sold
    Rsv4 pre aprc key system sold
    rsv4 oem pillon rear sets sold
    Tuono/rsv4 exhaust servo full carbon cover sold
    rsv4 US spec kickstand with better angle sold
    rsv4/tuono rear wheel bobbins with hub sold
    rsv4 front headlight sold
    carbon heels sold
    right side fairing black matte sold
    upper nose black matte sold
    rsv4 air intake cover sold
    rsv4 front fairing stay sold
    Bazzaz sold
    rsv4 magnesium clutch cover mint sold
    Tuono Gel comfort seat sold
    rsv4 Left and right side panels sold
    rsv4 rear set cowl 100% real carbon made sold
    rsv4 oem master pump with original lever sold
    rsv4 factory OEM clip ons sold
    Rsv4 OEM air intake sold
    rsv4 OEM front rotor sold
    PSR block off sold
    CRG clutch lever , with clutch system sold
    Tuono v4 front fairing stay sold
    Tuono v4 head lights with harness sold
    Tuono v4 mirrors sold
    Tuono left & right side panels 100% carbon made - sold
    rsv4 front mudguard sold
    rsv4 rear hugger sold
    I'm willing to ship anywhere worldwide.
    Most of the items can be seen below. This was a garage bike owned by a mechanic, well taken care of and mint.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_4784.jpg 
Views:	43 
Size:	495.2 KB 
ID:	326698  

    Click image for larger version. 

Name:	IMG_4735.jpg 
Views:	51 
Size:	559.2 KB 
ID:	326579  

    Click image for larger version. 

Name:	FullSizeRender(2).jpg 
Views:	35 
Size:	534.1 KB 
ID:	326697  

    Click image for larger version. 

Name:	IMG_4839.JPG 
Views:	17 
Size:	458.6 KB 
ID:	328260  

    Last edited by ZarcoChamp; 04-19-2017 at 09:42 PM.

  2. #2
    apriliaforum Junkie
    Join Date
    May 2015
    Location
    Nor-cal
    Posts
    460
    Feedback Score
    2 (100%)
    Hey Zarco, i bought a gb cover and clip ons and some other stuff from you back in 11/16.

    Everything was good except the gb cover, the mounting holes were broken on 3/4 of the mounts, i tried to fix it but it was not able to be glued back, I didnt say anything because i bought it used, but now you got some more for sale, is there anything you can do to help me out, the part you sold me - it was never able to be used because it was broken.




  3. #3
    apriliaforum Member
    Join Date
    Jul 2015
    Location
    New Zealand
    Posts
    203
    Feedback Score
    0
    Quote Originally Posted by FXCLM5 View Post
    Hey Zarco, i bought a gb cover and clip ons and some other stuff from you back in 11/16.

    Everything was good except the gb cover, the mounting holes were broken on 3/4 of the mounts, i tried to fix it but it was not able to be glued back, I didnt say anything because i bought it used, but now you got some more for sale, is there anything you can do to help me out, the part you sold me - it was never able to be used because it was broken.
    I have no stake in this, but when I bought mine AF1 advised that these cracks were normal. Seems weird to me, but...


    GB Racing Clutch Cover Protection - V4 *Updated*

    GB Racing Clutch Cover Protection
    For '09-'16 RSV4 (all variants) and '11-'16 Tuono V4 (all variants)
    *This is the 2016 updated design with notch reliefs for use on 2016 and later V4's
    Constructed from Injection Molded Long Fiber NYLON this clutch cover has earned FIM closed course approval for road racing due to it's sturdy design that covers the entire clutch pack section of the clutch cover.
    Matching Stator Cover also available.
    Bolt on product, allowing fast and easy removal and/or replacement. Instructions are included.


    **Please note: Some customers have noted that the bushing supports can be split as seen in the photo below. GB Racing assures us this is normal and does not affect the function of the part.

    http://www.af1racing.com/store/Scrip...dproduct=38318



  4. #4
    apriliaforum Member
    Join Date
    Nov 2016
    Location
    Next to a gas station
    Posts
    167
    Feedback Score
    2 (100%)
    Hi Das, thanks for answer.

    FXCLM5, as stated by AF1, it comes like that, they're not broken and can be used.
    I don't particularly like GB covers that's why I'm removing them. I've got a pair of Lightech which is more strong and resistant in the event of a crash.
    Since you've purchase something from me in the past, let me know if you're after anything and we can discuss by pm.

    Thanks

    Going to the workshop today to remove some parts, I'll add pictures later.

  5. #5
    apriliaforum expert
    Join Date
    Mar 2006
    Location
    bay area california
    Posts
    554
    Feedback Score
    0
    zarco do you still have the gilles tooling gear holder ?

  6. #6
    apriliaforum expert
    Join Date
    Mar 2006
    Location
    bay area california
    Posts
    554
    Feedback Score
    0
    is it this one?
    http://www.af1racing.com/store/Scrip...idProduct=9078
    if it is and it is complete i'll take it, let me know

  7. #7
    apriliaforum Member
    Join Date
    Dec 2015
    Location
    DePere, WI
    Posts
    225
    Feedback Score
    1 (100%)
    Interested in the RSV4 CF rear seat cowl.....can you send me a few photos? I'll IM you my email address

  8. #8
    apriliaforum Junkie aftriathlete's Avatar
    Join Date
    May 2016
    Location
    The Great American Southwest
    Posts
    259
    Feedback Score
    0
    PM'd on rotors.
    2016 RSV4 RR Race Bike

  9. #9
    apriliaforum Junkie
    Join Date
    May 2015
    Location
    Nor-cal
    Posts
    460
    Feedback Score
    2 (100%)
    zarco lookat the af1 pic and lookat the pictures i supplied, the piece you gave me does not look anything like af1 pics, as you can see all of the bushing has shifted out of the bushing holder, it does not even bolt on

    like i said before i bought this part used - but it never worked, i didnt bother to complain or ship it back across the world again because it was only like $60-70 or something? and i didnt want to ship 1 thing back to malaysia.... but now since you are selling the same part again..... so I am just reaching out to you to see if we can work something out.

    af1 pic

  10. #10
    apriliaforum Member
    Join Date
    Nov 2016
    Location
    Next to a gas station
    Posts
    167
    Feedback Score
    2 (100%)
    Understood. You made your point, let's sort this out in PM, I'll send you a picture of the new GB set and we work something out.
    This new set doesn't have the issues as this describes.

    Others:
    Viper1 and aftriathlete pending sales waiting for payment for rear seat cowl and rotors

  11. #11
    apriliaforum Member
    Join Date
    Nov 2016
    Location
    Next to a gas station
    Posts
    167
    Feedback Score
    2 (100%)
    Quote Originally Posted by platini View Post
    is it this one?
    http://www.af1racing.com/store/Scrip...idProduct=9078
    if it is and it is complete i'll take it, let me know
    I'm sorry, unfortunately this one is not available and will be removed from the list.

  12. #12
    apriliaforum Member
    Join Date
    Nov 2016
    Location
    Next to a gas station
    Posts
    167
    Feedback Score
    2 (100%)
    Here some more pictures of the items
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_4780.jpg 
Views:	34 
Size:	493.5 KB 
ID:	326700  

    Click image for larger version. 

Name:	IMG_4781.jpg 
Views:	35 
Size:	485.2 KB 
ID:	326701  

    Click image for larger version. 

Name:	IMG_4470.jpg 
Views:	29 
Size:	486.6 KB 
ID:	326939  

    Click image for larger version. 

Name:	IMG_4786.jpg 
Views:	36 
Size:	489.1 KB 
ID:	326703  

    Click image for larger version. 

Name:	IMG_4791.jpg 
Views:	30 
Size:	491.0 KB 
ID:	326706  

    Last edited by ZarcoChamp; 03-29-2017 at 09:01 AM.

  13. #13
    apriliaforum expert TrackDayRdr's Avatar
    Join Date
    Apr 2015
    Location
    North of Boston, MA
    Posts
    555
    Feedback Score
    1 (100%)
    Where are you located?

  14. #14
    apriliaforum Member
    Join Date
    Nov 2016
    Location
    Next to a gas station
    Posts
    167
    Feedback Score
    2 (100%)
    Malaysia, a bit far from your part of the world but I can compromise on shipping if necessary

  15. #15
    apriliaforum Junkie
    Join Date
    May 2015
    Location
    Nor-cal
    Posts
    460
    Feedback Score
    2 (100%)
    Zarco your a honest seller!

    I just resent you a PM, i did not realize my outbox is full so my last one did not get sent.

Page 1 of 3 123 LastLast

Similar Threads

  1. [RSV4] GB Racing Engine Case Cover Set (RSV4 & Tuono V4 09-13)
    By S.A.B. in forum Aprilia Parts and Accessories for Sale
    Replies: 3
    Last Post: 11-10-2013, 06:22 AM
  2. [RSV4] CF / Kevalr Tank for RSV4 - Tuono V4
    By MTPockets in forum Aprilia Parts and Accessories for Sale
    Replies: 19
    Last Post: 10-01-2013, 12:17 AM
  3. [RSV4] WTB - Exhaust hanger bracket for RSV4 / Tuono V4
    By MishMashRSV4 in forum Aprilia Parts and Accessories for Sale
    Replies: 1
    Last Post: 07-15-2013, 09:39 PM
  4. [RSV4] RSV4 Tuono V4 OEM quickshifter UK
    By Toohomo in forum Aprilia Parts and Accessories for Sale
    Replies: 3
    Last Post: 05-08-2013, 08:56 AM
  5. Wanted to Buy Wheels to suit RSV4/ Tuono V4 Australia Qld
    By spunant in forum Aprilia Parts and Accessories for Sale
    Replies: 4
    Last Post: 06-14-2012, 03:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •