No Brake lights

[RRstl1000]

I recently had my 6k mile service done and the latest map installed, the only problem is i no longer have brake lights? Tail light is illuminated but neither the foot brake or front brake make any thing happen.

I checked the actual tail light connection and all looks well. Im sure its something minor, none the less im sure someone on here will point me in the correct direction. Next part etc... to check.

[Ed / AF1 Racing]

Give the little button on the front brake swith a push with a screwdriver or something. They seem to be a little sticky sometimes, once free they tend to work a long time.

[RRstl1000]

Give the little button on the front brake swith a push with a screwdriver or something. They seem to be a little sticky sometimes, once free they tend to work a long time.

I will give this a try but i dont believe the light to be stuck on.

[Durak]

I attended a training course on the RSV4 and remember them saying the ECU has an input to the brake light. This is why it comes on for a couple of seconds during the power up cycle.

[V4Victory]

I attended a training course on the RSV4 and remember them saying the ECU has an input to the brake light. This is why it comes on for a couple of seconds during the power up cycle.

The logic recovery relay flashes the stoplight during the power up cycle. The n/o contacts are wired in parellel with the brake switches.
The brake light and the license plate light are get their supply from Aux Fuse A , check this hasn't been disaplaced