Adjustable clutch/brake levers for Pegaso Strada

[kreon]

Hi all!
Anybody knows about subject?

Thanks.

[rictus]

I can't answer the question, but my brother has the Dorsoduro and I know you can get the short adjustable ones for that, I'll have a look at the weekend if they are the same as the Pegaso ones.

Cheers Mark

[fedro69]

Old Question:
Brake lever : non Problems! is used from a big amount of Bikes, here a partially List:
-Benelli TnT 1130/899 and TreK 1130/899
-Bimota DB6
-BMW G650X- Moto/Country/Challenge
-almost all Guzzi 850/1100, Nevada 750 e and Stelvio + Sport 1200
-Moto Morini 9 1/2 and Corsaro in all versions
-Yamaha FJR1300/ABS ≥ 2003, FZ1/Fazer/GT ≥ 2006, FZ6/Fazer/S2 ≥ 2004,
MT03 ≥ 2006, TDM900 ≥ 2005, XJR 1300 ≥ 2004
…
The Clutch lever: seems that we are the ones in the world with that piece
BUT:
the Benelli 1130/899 mechanical clutch lever is the same as the BMW g650 Serie (cheap ;-) )
and is compatible to our mirrors (yamaha left brackets aren't)
and for these models there's enough choice from Pazzo to Wünderlich ;-)

[pegasobaz]

As Fedro69 said, there are lots of options for the brake lever, I got a pattern one off Ebay for a Fazer 1000. As for the clutch, I found these which look similar when compared with the original. I haven't measured the fulcrum distance to determine which one it is.

http://www.domino-group.com/en/catal...?idmaster=2220

http://www.domino-group.com/en/catal...?idmaster=2364

http://www.domino-group.com/en/catal...?idmaster=2366

the UK Domino importer is Malcolm Rathmell Sport on : 01423 772885 http://www.mrsltd.co.uk/DominoLeverB...no_road_levers

[fedro69]

the 0112.61.32.04 isn't compatible
too thick for the bracket and fulcrum about 2 mm too long: personally tested

[rictus]

might sound stupid, but do you know the Dorsoduro/shiver one's don't fit? only it'll save me taking off my brothers bike to measure at the weekend.

Cheers Mark.

[fedro69]

Does the Dorso have a hydraulic clutch?

[kreon]

I've tested clutch lever (stock) from DRZ400, just drilled the holes to 10 & 10.5 mm. It works, but without clutch sensor.

[sanddweller]

Hi All,
I recently found at local Yamaha dealer, a clutch lever that fits and works nicely.
(For those of you in Qld/Aus, TeamMoto part number LCHU2, also other Aus dealers)
The lever is listed as suitable for Husqvarna TE/SM 610, and also older KTM 640 Duke/SuperMotard

(example: http://www.ebay.com.au/itm/CLUTCH-LE...b#ht_681wt_931)
http://www.mcsonline.com.au/index.ph...art&Itemid=126

Possibly: http://www.wemoto.com/bikes/husqvarn.../clutch_lever/

Fwiw, Apparently this works on MotoGuzzi Brevo 750 as well..

regards

[giamaica75]

Hi guys, I am a newbie here, even if I have read this forum for a while.
If there is somebody out there which has access to a CNC machine, let me know: I designed a couple of brake/clutch levers, but I didn't manage to get them produced to check (I have used the original ones to take the basic dimensions), happy to send the drawings to see them machined!