Results 1 to 4 of 4

Thread: Ditech 50 Air injection and Compression numbers?

  1. #1
    apriliaforum prov-nov
    Join Date
    May 2012
    Location
    United States
    Posts
    37

    Ditech 50 Air injection and Compression numbers?

    Looking for Air pressure and Engine Compression numbers. I bought a Compression test kit and want to check engine compression and Air Injection numbers.
    Please advise.

    Thank you

  2. #2
    apriliaforum expert Cool77's Avatar
    Join Date
    Sep 2010
    Location
    Drummondville,Quebec
    Posts
    682
    90 to 100 psi for engine can still work from 60 to 90

    60 to 70 for air pressure can still work from 50 to 60.
    Aprilia SR Factory 50 2006 IE Morini Engine type

    13 500KM

    MAX Speed after rod in 92KM/H flat no wind, 104 KM/H tuck

    Malossi BBK + Full Circle Crank since 10 287KM

    Stock Gears

    ECU : Malossi

    Mod : Leo Vince ZX-R Pipe flat black ceramic coated - HGT regulator Gen III - Malossi multivar 2000 - 9.0gr Dr. Pulley rollers - Malossi delta clutch small white spring big white spring w/o tc - Malossi belt - Malossi red foam air filter - ZMR7AP plug - Water trap - Malossi Reed valve VL-12 - Buzzetti side stand - YSS Rear shock.

  3. #3
    apriliaforum prov-nov
    Join Date
    May 2012
    Location
    United States
    Posts
    37
    Awesome Thanks Cool77!

  4. #4
    Moderator (ADSUM) Grenadiers's Avatar
    Join Date
    Sep 2008
    Location
    Nice weather AT LAST! Winnipeg, MB
    Posts
    10,440
    Just be advised that if the engine compression is between 60 to 75PSII, she will start and run, but it will be hard to start (especially when cold) and you will foul plugs... fast!

    Below 60 she may not start...

    Anger is an ugly Mistress…
    06 SR50 (Morini)/AIRSAL 70CC BBK/NGK BR9EIX/My Top Speed-117KPH (GPS)!!
    Rear Rack & Top Case/Buzzetti Side stand/Aprilia Racing Shock W/STR8 65mmRiser/HGT Stretch Kit
    HGT PFI Kit/Malossi MHR Team II Pipe/All Polished Water Pump
    Black HGT Gen 3 Fuel Regulator/Stebel Magnum Horn/Glowshift Elite Gauge
    BING 26mm TBA/BGM Pro Reed Block & Pod Filter
    Polished Aluminum Varo W/Kick start & Pod Filter/HEL Brake Lines
    HGT Red Brake Levers/LED bulbs/BGM LED Tail Light
    Malossi Delta Clutch w/Blue springs/Red Contra spring & TC/MHR Full Circle Crank
    Malossi 15/40 Primary Gears & Multivar w/4.4gr Dr. Pulley Sliders/Kevlar Belt
    Michelin Pilot Sport 140/60 Rear tire w/Dyna Beads & TPMS Sensor

Similar Threads

  1. Scarabeo 50 Ditech... running fine... sputtered and died.
    By bigpuss in forum Scarabeo 50 Ditech, SR 50 Ditech, SR Factory
    Replies: 23
    Last Post: 07-11-2012, 06:54 PM
  2. sr 50 morini ditech 07 air intake?
    By scooterboy32 in forum Scarabeo 50 Ditech, SR 50 Ditech, SR Factory
    Replies: 3
    Last Post: 04-03-2012, 02:54 PM
  3. scarabeo ditech 50? air filter?
    By Matthew Mimmack in forum Scarabeo 50 Ditech, SR 50 Ditech, SR Factory
    Replies: 4
    Last Post: 07-10-2008, 05:36 PM
  4. Test rode a 2006 DiTech SR 50 Factory today and...
    By TreeHouse in forum Scarabeo 50 Ditech, SR 50 Ditech, SR Factory
    Replies: 9
    Last Post: 09-16-2005, 12:43 AM
  5. Buy a Capo and get a...Ditech 50 Scooter
    By olie in forum ETV1000 CapoNord (all years)
    Replies: 0
    Last Post: 06-20-2004, 04:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •